Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 329
53-1000437-01
Chapter
60
RTWR System Messages
RTWR-1001
Message <timestamp>, [RTWR-1001], <sequence-number>,, ERROR, <system-name>, RTWR
<routine: error message> 0x<detail 1>, 0x<detail 2>, 0x<detail 3>, 0x<detail 4>,
0x<detail 5>
Probable Cause Indicates that an error occurred in the RTWR. The message provides the name of the routine
having the error, and more specific error information. The values in details 1 through 5 might
provide more information.
Recommended
Action
No action is required.
Severity ERROR
RTWR-1002
Message <timestamp>, [RTWR-1002], <sequence-number>,, WARNING, <system-name>, RTWR <error
message> 0x<detail1>, 0x<detail2>, 0x<detail3>, 0x<detail4>, 0x<detail5>
Probable Cause Indicates that the RTWR has exhausted the maximum number of retries sending data to the
specified domain. Possible detail values include:
RTWRTransmit: Max retries exhausted
detail1: Port
detail2: Domain
detail3: Retry Count
detail4: Status
detail5: Process ID
Recommended
Action
Run the fabricShow command to see if the specified domain ID is online.
Enable the switch with the specified domain ID.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING