Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

348 Fabric OS Message Reference
53-1000437-01
SEC-1057
63
SEC-1057
Message <timestamp>, [SEC-1057], <sequence-number>,, ERROR, <system-name>, No change.
Both positions are the same.
Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can
only occur when the primary fabric configurations server (FCS) is distributing the security database
to the other switches in the fabric and local validation finds that there is an error in the security
database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR
SEC-1059
Message <timestamp>, [SEC-1059], <sequence-number>,, ERROR, <system-name>, Fail to
<operation, e.g., save, delete, etc.,> <named item> to flash.
Probable Cause Indicates that the operation failed when writing to flash.
Recommended
Action
Run the supportFtp - e command to FTP files from the switch and remove them from the flash.
Severity ERROR
SEC-1062
Message <timestamp>, [SEC-1062], <sequence-number>,, ERROR, <system-name>, Invalid number
of Domains in Domain List.
Probable Cause Indicates either that no domains or domains more than the maximum number supported are
specified.
Recommended
Action
Enter the correct number of domains.
Severity ERROR