Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 349
53-1000437-01
SEC-1063
63
SEC-1063
Message <timestamp>, [SEC-1063], <sequence-number>,, ERROR, <system-name>, Failed to
reset statistics.
Probable Cause Indicates that either the type or domains specified are invalid.
Recommended
Action
Enter valid input.
Severity ERROR
SEC-1064
Message <timestamp>, [SEC-1064], <sequence-number>,, ERROR, <system-name>, Failed to sign
message.
Probable Cause Indicates that the public key infrastructure (PKI) objects on the switch are not in a valid state and
the signature operation failed.
Recommended
Action
Run the pkiShow command to verify that all PKI objects are valid. If PKI objects are not valid,
generate the PKI objects and install the certificate by following the field upgrade process.
Severity ERROR
SEC-1065
Message <timestamp>, [SEC-1065], <sequence-number>,, ERROR, <system-name>, Invalid
character in list.
Probable Cause Indicates that the input list has an invalid character.
Recommended
Action
Enter valid input.
Severity ERROR
SEC-1069
Message <timestamp>, [SEC-1069], <sequence-number>,, ERROR, <system-name>, Security
Database is corrupted.
Probable Cause Indicates that the security database is corrupted for unknown reasons.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity ERROR