Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

352 Fabric OS Message Reference
53-1000437-01
SEC-1077
63
SEC-1077
Message <timestamp>, [SEC-1077], <sequence-number>,, ERROR, <system-name>, Failed to
activate new policy set on all switches.
Probable Cause Indicates that the policy could not be activated. Possible reasons that the policy could not be
activate include not enough memory or a busy switch.
Recommended
Action
Run the secFabricShow command to verify that all switches in the fabric are in the ready state.
Retry the command when all switches are ready.
Severity ERROR
SEC-1078
Message <timestamp>, [SEC-1078], <sequence-number>,, ERROR, <system-name>, No new data to
abort.
Probable Cause Indicates that there are no new changes in the defined security policy database that can be
aborted.
Recommended
Action
Verify that security event was planned. Verify if there were really any changes to the defined policy
database that can be aborted.
Severity ERROR
SEC-1079
Message <timestamp>, [SEC-1079], <sequence-number>,, ERROR, <system-name>, The policy
name
<policy name> is invalid.
Probable Cause Indicates that the policy name entered in the secPolicyCreate|Activate|Add|Delete command was
invalid.
Recommended
Action
Run the command again using a valid policy name.
Severity ERROR