Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

366 Fabric OS Message Reference
53-1000437-01
SEC-1126
63
Severity INFO
SEC-1126
Message <timestamp>, [SEC-1126], <sequence-number>,, INFO, <system-name>, Secure mode has
been disabled.
Probable Cause Indicates that a secure mode disable operation completed successfully.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise
security policy.
Severity INFO
SEC-1130
Message <timestamp>, [SEC-1130], <sequence-number>,, INFO, <system-name>, The Primary FCS
has failed over to a new switch.
Probable Cause Indicates that an FCS failover operation was completed successfully.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise
security policy.
Severity INFO
SEC-1135
Message <timestamp>, [SEC-1135], <sequence-number>,, INFO, <system-name>, Secure fabric
version stamp has been reset.
Probable Cause Indicates that the version stamp of the secure fabric is reset.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise
security policy.
Severity INFO