Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

372 Fabric OS Message Reference
53-1000437-01
SEC-1163
63
SEC-1163
Message <timestamp>, [SEC-1163], <sequence-number>,, ERROR, <system-name>, System is
already in secure mode. Lockdown option cannot be applied.
Probable Cause Indicates that the lockdown option was attempted while the fabric is already in secure mode.
Recommended
Action
Do not use the lockdown option with the secModeEnable command when switch is already in
secure mode.
Severity ERROR
SEC-1164
Message <timestamp>, [SEC-1164], <sequence-number>,, ERROR, <system-name>, Lockdown
option cannot be applied on a non-FCS switch.
Probable Cause Indicates that the attempt to enable security is made on a switch that is not present in the fabric
configurations server (FCS) list.
Recommended
Action
Add the switch into the FCS policy list when using the lockdown option to enable security.
Severity ERROR
SEC-1165
Message <timestamp>, [SEC-1165], <sequence-number>,, ERROR, <system-name>, Low memory,
failed to enable security on all switches.
Probable Cause Indicates that the system is low on memory.
Recommended
Action
Wait a few minutes and try the command again.
Severity ERROR