Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 393
53-1000437-01
SEC-1327
63
SEC-1327
Message <timestamp>, [SEC-1327], <sequence-number>,, WARNING, <system-name>, Strict
<Policy Name> policy is conflicting with domain <Domain Number>
Probable Cause Strict policy is conflicting.
Recommended
Action
None, the domain is denied by disallowing all its E-ports connected to the fabric. If the domain
should be allowed to merge with the fabric, then resolve the issue by making the conflicting
policies same.
Severity WARNING
SEC-1328
Message <timestamp>, [SEC-1328], <sequence-number>,, ERROR, <system-name>, Attempt to
enable secure mode failed. Reason: <Reason>.
Probable Cause Indicates that the secModeEnable command failed on the fabric, because Authentication Policy is
enabled on the switch.
Recommended
Action
Verify that the security event was planned. If the security event was planned, run the authUtil
--policy passive command to disable the Authentication Policy and retry the secModeEnable
command.
Severity ERROR
SEC-1329
Message <timestamp>, [SEC-1329], <sequence-number>,, ERROR, <system-name>, IPFilter
enforcement: Failed to enforce ipfilter policy of <policy Type> type because of
<Error code>.
Probable Cause Indicates that the IP filter policy enforcement failed due to internal system failure.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity ERROR
SEC-1330
Message <timestamp>, [SEC-1330], <sequence-number>,, ERROR, <system-nam>, <Name of
command> command failed - <List of databases rejecting distribution> db(s) are
coming from a non-Primary switch.
Probable Cause Indicates that an attempt was made to distribute database(s) either from a backup fabric
configuration server (FCS) switch or from a non-FCS switch.