Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 453
53-1000437-01
ZONE-1034
77
ZONE-1034
Message <timestamp>, [ZONE-1034], <sequence-number>,, WARNING, <system-name>, Zoning file
doesn't exist or Corrupted Zoning files detected before reboot, currently the file
is saved at
<config file name>
Probable Cause Indicates that the zone database is corrupt or zone database is not found.
Recommended
Action
Use the firmwareDownload command to reinstall the firmware.
Severity WARNING
ZONE-1035
Message <timestamp>, [ZONE-1035], <sequence-number>,, ERROR, <system-name>, Unable to
rename <Old config file name> to <New config file name>: error message <System
Error Message>
Probable Cause Indicates that the Fabric OS cannot rename the zone configuration file. Typically the zone
configuration is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR
ZONE-1036
Message <timestamp>, [ZONE-1036], <sequence-number>,, ERROR, <system-name>, Unable to
create <config file name>: error message <System Error Message>
Probable Cause Indicates that the Fabric OS cannot create the zone configuration file. Typically the zone
configuration is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR