Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 455
53-1000437-01
ZONE-1040
77
ZONE-1040
Message <timestamp>, [ZONE-1040], <sequence-number>,, INFO, <system-name>, Merged zone
database exceeds limit.
Probable Cause Indicates that the Fabric OS cannot read the merged zone configuration file. Typically the zone
configuration is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity INFO
ZONE-1041
Message <timestamp>, [ZONE-1041], <sequence-number>,, WARNING, <system-name>, Unstable
link detected during merge at port (
<Port number>).
Probable Cause Indicates a possible unstable link or faulty cable.
Recommended
Action
Check the SFP and cable at the specified port and verify that they are not faulty. Replace the SFP
and cable as necessary.
Severity WARNING
ZONE-1042
Message <timestamp>, [ZONE-1042], <sequence-number>,, INFO, <system-name>, The effective
configuration has been disabled.
<AD Id>.
Probable Cause Indicates that the effective zone configuration has been disabled.
Recommended
Action
Verify that this zone configuration change was done on purpose. If no effective zone configuration
is needed, no action is necessary.
Severity INFO
ZONE-1043
Message <timestamp>, [ZONE-1043], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is set to No Access.
Probable Cause Indicates that the Default Zone access mode is set to No Access.
Recommended
Action
Verify that this Default Zone access mode change was done intentionally.
Severity INFO