Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

10 Fabric OS Message Reference
53-1000437-01
Reading a RAS System Message
1
AUDIT, 2005/12/10-09:54:03, [SEC-1000], WARNING, SECURITY,
JohnSmith/root/192.168.132.10/Telnet/CLI, Domain A/JohnsSwitch, , Incorrect
password during login attempt.
The fields in the error message are described in table below.
TABLE 4 Audit Message Field Description
Example Variable Name Description
AUDIT Audit flag Identifies the message as an Audit message.
2005/12/10-09:54:03 Date and Time Stamp The system time (UTC) when the message was
generated on the switch. The RASLog subsystem will
support an internationalized timestamp format base
on the “LOCAL” setting.
[SEC-1000] Message Module and
Message Number
Displays the message module and number. These
values uniquely identify each message in the Fabric OS
and reference the cause and actions recommended in
this manual. Note that not all message numbers are
used; there can be gaps in the numeric message
sequence.
WARNING Severity Level Displays the severity of the error in alpha format:
1 = Critical
2 = Error
3 = Warning
4 = Info
SECURITY Event Class Identifies the event class as one of the following:
Zone
Security
Configuration
Firmware
Fabric
JohnSmith User ID Identifies the user ID.
root Role Identifies the role of the user ID.
192.168.132.10 IP Address Identifies the IP address.
Telnet Interface Identifies the interface being used.
CLI Application Name Identifies the application name being used on the
interface.
Domain A Admin Domain Identifies the Admin Domain, if there is one.
switchname Switch name or chassis
name, depending on
the action; for example,
HA messages typically
show the chassis name
and login failures show
the logical switch
name.
This field displays the defined switch name or the
chassis name of the switch. This value is truncated if it
is over 16 characters in length. Run either the
chassisName command to name the chassis or the
switchName command to rename the logical switch.
, ,
Null Reserved for future use.
Slot 7 ejector not
closed
Error Description This field displays a text string explaining the
error encountered and providing parameters
supplied by the software at runtime.