HP StorageWorks Fabric OS 5.3.1b release notes (5697-7644, August 2008)

Closed defect summary
Solution
Host takes a long time to log in when disabled/unused GE-iS CSI
ports have IP ad
dresses configured to them. When host does a
"SendTargets=
All" those IP addresses will be in the list, but will be
unreachable.
Fixed in Fabric
OS 5.3.0
After changing Backbone FID, switchshow does not display LE
port information for some EX or VEX ports. Ports function correctly,
only the display is incorrect.
Fixed in Fabric OS 5.3.0
On FC4-16IP iSCSI Blade, console log for iSNS reports the
management port as slot/port 0/0.
Fixed in Fabric OS 5.3.0
With multipl
e FC4-16IP blades in multiple 4/256 directors in the
fabric and IS
NSC enabled, iSNS error message is logged on only
oneswitch,butshouldbeloggedonallswitchesinthefabric.
Fixed in Fab
ric OS 5.3.0
May not see the targets after successful iSCSI login with FC4-16IP
using AIX if immediate data is enabled.
Fixed in Fabric OS 5.3.0
LE ports not up after trunk disable/enable as evidenced by EX_Port
not coming online.
Fixed in Fabric OS 5.3.0
Switchsho
w shows EX_Port left disabled after it’s enabled due to
setting VC
Credits failure. In addition, when EX_Port trunk master is
unplugged
, non-trunk master ports are disabled.
Fixed in Fabric OS 5.3.0
Execquery Brocade_SwitchFcPortRateStats is not returning
correct Instances. When Admin Domain’s are created on the switch
side without stopping the SMI-A, it always returns Instances with
respect to Admin Domain0.
Fixed in Fabric OS 5.3.0
Sometimes when trying to add/modify Admin Domain list for multiple
user accounts simultaneously, Admin Domain list for user accounts
changes.
Fixed in Fabric OS 5.3.0
Port det
ailreportshowsincorrectvaluesforiSCSIportswithFC4-16IP
Blade.
Fixed in Fabric OS 5.3.0
swFCPortOpStatus of swFCPortScn is not reported correctly.
Fixed in Fabric OS 5.3.0
Excessive logins cause out-of-memory (OOM) panic while switching
between user roles and executing Configshow command.
Fixed in Fabric OS 5.3.0
Vulnerabilities reported about open SSL VU#386964 & VU#547300.
For VU#547300:OpenSSL SSL_get_shared_ciphers() vulnerable to
buffe
roverflow. For VU#386964:OpenSSL SSLv2 client code fails to
prope
rly check for NULL.
Fixed in Fabric OS 5.3.0
Denial-of-Service condition affecting X.509 certificates verification
(NISCC #729618) due to SSL vulnerability in OpenSSL. FOS 5.3.0
includes new version of OpenSSL that resolves this.
Fixed in Fabric OS 5.3.0
Incorrect time in Web Tools Switch Health report. Fixed in Fabric OS 5.3.0
Incorrect F_Port behavior when RX side of the cable is disconnected,
while the TX side is still inserted.
Fixed in Fabric OS 5.3.0
Installation of PKI certificate is delayed on any switch on which
installation is attempted due to timing of the startup function.
Fixed in Fabric OS 5.3.0
The last character of config uploaded Banner (via “bannerset” CLI
command) will disappear when per forming a configupload
followed by configdownload.
Fixed in Fabric OS 5.3.0
Wh
en connected to i10k Director in open mode, an RSCN received
fr
om the i10k was not immediately forwarded.
Fixed in Fabric OS 5.3.0
20