HP StorageWorks Fabric OS 5.3.1b release notes (5697-7644, August 2008)

Fabric OS 5.3.0a fixes
Table 4 lists defects closed in the Fabric OS 5.3.0a firmware release.
Table 4 Fabri
cOS5.3.0acloseddefects
Closed defec t summary
Solution
Iswitchd panic o ccurred d uring data migration with DMM when
invalid fram
eissuedtotheswitch.
Fixed in Fabric OS 5.3.0a.
Panic occurred on SAN Director 2 /128 when running MS commands
GPT/GPPN/GPS/GAPNL continuously.
Fixed in Fabric OS 5.3.0a.
When the 4/64 SAN Switch is constantly rebooted, the Name server
crashed in rare conditions.
Fixed in Fabric OS 5.3.0a.
4/32B SAN Switch running 5.3.0 rejected GID_Ft c ommand from
an HBA with “FC4-type not registered” error. HBA sees no devices.
Fixed in Fa
bric OS 5.3.0a by
implement
ing a more robust zone
name check to avoid confusing
frame red
irection zones with regular
zone name
s.
In isolated cases, degraded performance can occur with the Brocade
4Gb SAN Switch for HP c-Class BladeSystem when internal por ts
are operated at 4Gb/sec.
Fabric OS 5.3.0a optimizes certain
settings in the switch to address this
issue.
Unable to c on figure FCIP tunnels using Web Tools in FOS 5.3.0.
FCIP wizard and stand-alone tab
support added for near end tunnel
configuration with Fabric OS 5.3.0a.
In fram
e redirect mode, GA_NXT query from initiator returns VI PID
and PWW
NinsteadofhostPWWN.
Fixed in Fabric OS 5.3.0a.
scpd can crash on rare occasions due to memory leak in NS
API/library during NS queries.
Fixed in Fabric OS 5.3.0a.
In Open m ode, when F_Ports are connected to ports 16-47 on the
FC4-48 Blade with WWN zoning, the Zone enforcement shows
as SESSION BASED and the portcamshow command displays
misleading information.
Fixed in Fabric OS 5.3.0a.
In fr
ame redirect mode, GPN_NN query returns VI PWWN and PID
inst
ead of initiator PWWN and PID.
Fixed in Fabric OS 5.3.0a.
22