HP StorageWorks Fabric OS 5.3.1b release notes (5697-7644, August 2008)

Fabric OS 5.3.1a fixes
Table 9 lists defects closed in the Fabric OS 5.3.1a firmware release.
Table 9 Fabri
cOS5.3.1acloseddefects
Closed defect summary
Solution
F_Port link i
nitialization failure caused by
the switch no
t responding to N OS with OLS
(continues
to send idles).
Fixed in Fabric OS 5.3.1a
When downgrading from 6.0.0x to Fabric
OS 5.3.0c, then 5.2.1b, then 5.0.5a, the
switch can get into an endless reboot
causing file system errors to be reported.
Fixed in Fabric OS 5.3.1a
If your switch is not upgraded to 5.3.1a, the workaround is to
issue firmwaredownload with the -sf option:
firmwaredownload —sf
nl
Use default answ ers so that firmwaredownload does not
reboot after download, then perform the following steps:
nl
mount -oremount,ro /mntumount /mnt
nl
hareboot
FR4-18 i blade is faulted during operation
with internal FCIP-5031 raslog and external
EM-1034 raslog.
Fixed in Fabric OS 5.3.1a
The zoneadmin feature in Web Tools does
not display the new por ts after adding a
new blade.
Fixed in Fabric OS 5.3.1a
Only 1 FL p ort FLOGI is successful and
second FL port FLOGI is disabled in a
time interval. Even though FL port will be
re-enabled after the short time interval, 3rd
party failover application may fail.
Fixed in Fabric OS 5.3.1a
When the proxy device projected to the
backbone had a translate domain of
greater than 0x20, router is not translating
the ACC for a REC properly. Customer
observes traffic interrupted and tape device
fail.
Fixed in Fabric OS 5.3.1a
When there is an application request
GPPN on a device connected to multiple
switches, customer might see continuous
rtwr
message on a pair of switches and
directed at each other from msd:
nl
[RTWR-1003],,, INFO, , msd0:
RTWR retry 48 to domain 152,
iu_data 1000000 RTWR Maxretries
exhausted: 0x30, 0x8, 0x65,
0x0, 0x41d on multipath
switches.
nl
Potential for switch panic when memory is
exhausted.
Fixed in Fabric OS 5.3.1a
HP StorageWorks Fabric OS 5.3.1b release notes
27