HP StorageWorks Fabric OS 5.3.2b release notes (5697-0075, July 2009)

Fixed in Fabric OS 5.3.2.Too many FW-5002 messages causes a FFDC to be generated.
Fixed in Fabric OS 5.3.2.
nsd daemon is running out of memory.
Fixed in Fabric OS 5.3.2.
Switch experienced out-of-memory condition in interopmode with nsd
being killed.
Fixed in Fabric OS 5.3.2.WebTools does not work well in NAT environment.
Fixed in Fabric OS 5.3.2.After security network scan of switch, IPADMd is no longer running.
Fixed in Fabric OS 5.3.2.
Workaround: Reset SFPs to
avoid qualrate mode.
Speed negotiation fails on 4–Gb quadrate, long-wave 4–Km SFPs.
Fixed in Fabric OS 5.3.2.
4–Gb switch running at fixed 2–Gb speed may not respond to FLOGI from
HBA using auto-speed negotiation.
Fixed in Fabric OS 5.3.2.
WebTools zone admin alias displays duplicate PWWN on 48-port blade
card.
Fixed in Fabric OS 5.3.2.
Fabric OS 5.3.0c WebTools zone sort by member of alias and member of
zone is out of order.
Fabric OS 5.3.2a fixes
Table 7 lists the defects in the Fabric OS 5.3.2a firmware release.
Table 7 Fabric OS 5.3.2a closed defects
SolutionClosed defect summary
Fixed in Fabric OS 5.3.2a.
Workaround prior to upgrade:
Avoid this issue by not querying
connUnitPortFCId in AG
mode or FcFeModuleName MIB
A switch panic occurs due to a memory leak. This causes an Out of
memory trigger during hafailover/hareboot when querying connUnit-
PortFCId in AG (Access Gateway) mode and when querying FcFeModu-
leName.
Fixed in Fabric OS 5.3.2a.
If a second FDISC is received before the switch responds to the first FDISC
between the same pair of devices, the Access Gateway daemon panics,
triggering a reboot.
Fixed in Fabric OS 5.3.2a.
Access Gateway N_Port failover does not work if the HBA is brought online
and the mapped N_Port is offline. In this case, the HBA is not sent to an
available N_Port so that it can do a fabric login (FLOGI); instead, the HBA
waits for its mapped N_Port to become active.
18