HP StorageWorks Fabric OS 5.1.1b Release Notes (AA-RWEEG-TE, April 2007)

Table 1 4/256 SAN Director ch assis configuration options
Option
Number
of
domains
Max
ports
per
switch
Routing
module
Supported
CPs
Sup-
ported
port
blades
Implications
and notes
11
128 CER
CP2 or CP4
FC2-16,
FC4-16
CP4 will be
faulted if
inserted into
aUniversal
Chassis
22
64/64 CER/
CER
CP2 only
FC2-16
only
51
256
RTE
CP4 only
FC4-16,
FC4-32,
B-Series
MP Router
blade
CP4 will be
faulted if
inserted into
aUniversal
Chassis
Legend
CER = Core Edge Routing. Port-based routing scheme, same as routing option suppor ted
in Fabric OS 4.2.0 and 4.4.0
RTE = Advanced Routing. Exchange-based (default) or port-based routing scheme
CP2 = SAN Director 2/128 CP blade
CP4 = 4/256 SAN Director CP blade
FC2-16 = 2G, 16-port blade
FC4-16 = 4G, 16-port blade
FC4-32 = 4G, 32-port blade
B-Series MP Router blade = 4G, 16+2 routing blade
Zoning
Support fo
r Default Zoning policies have been added to Fabric OS 5.1.0 or later.
Typicall
y, when you issue the cfgDisable command in a large fabric with thousands
of dev ic
es, the name server indicates to all hosts that they c an communicate with each
other. To ensure that a ll devices in a fabric do not see each other during a cfgDisable
operation, you can activate a Default Zone with policy set to “no access”. If Default
zoning policies are enabled, all cfgEnable/Disable commands and zoning changes
must be run from a switch in the fabric running Fabric OS 5.1.0 or later.
Fabric OS 5.1.1b
7