HP StorageWorks Fabric OS 5.3.0c Release Notes (AA-RWEYG-TE, November 2007)

Error messages from ACL configuration through SMI are too generic
and don’t contain sufficient information to debug the problem.
Fixed per Fabric OS 5.3.0
Portstats: Selecting the “Show delta” rad io button and clicking on
the clear counter button, doesn’t clear the counters. It changes the
values to negative. Clicking the clear counter button again will reset
counter to zero.
Fixed per Fabr
ic OS 5.3.0
May see FFDC warning messages when manually changing switch IP
address in DHCP network.
Fixed per Fabric OS 5.3.0
Able to establish API session to Admin Domain 255 using “ u ser”
login which has Admin Domain membership only to Admin Domain
0,whichisnotallowedfromCLI,resultinginerror.UsersofSMIand
Web Tools won’t observe error because all operations performed
via Admin role user.
Fixed per Fabric OS 5.3.0
Web Tools c
urrentlynotconsistentwithCLIon
nl
configuring long distance for ports if current Admin Domain owns
them but not switchmembership.
nl
Por t long distance settings are read-only for owned ports on
non-owned switches in Web Tools Extended Fabric tab, but editable
for owned ports in Web Tools port configuration wizard.
Fixed per Fabric OS 5.3.0
SNMP traps repeatedly sent from the switch every 2 seconds when
port taken out of a fault state implicitly by removing cable or module.
Caused by too many port offline SCNs being sent out during port
fault and recover when there is laser fault.
Fixed per Fabric OS 5.3.0
Firmwa
re downgrade to Fabric OS 5.1 or earlier is blocked even
after ports 256 – 384 are removed from DCC policy created using
[*] option. Currently have to delete DCC policy to avoid this.
Fixed per Fabric OS 5.3.0
Admin user account with permissions to only Admin Domain 255
can create Admin Domains, but only Admin user accounts with
permissions for all Admin Domains should be able to do this.
Fixed per Fabric OS 5.3.0
Confirmation dialog doesn’t app ear when name server table closed
by clicking the “X” button. User experiences unexpected close when
clicking “X” button.
Fixed per Fabric OS 5.3.0
Deta
iled view of any device doesn’t refresh properly when Auto
refr
esh o ption is selected & user resizes/scrolls the window.
Fixed per Fabric OS 5.3.0
Role name, and sometimes user name, missing from error message
when user exits from a Telnet session.
Fixed per Fabric OS 5.3.0
The 2/16v switch produces ARB(vc) fill words instead of idles which
could cause failures with certain long distance devices when running
Fabric OS 5.2 with the following port configuration:
nl
—portcfglongdistance <port> LS 1 50
nl
—portcfgislmode <port> 1
Fixed per Fabric OS 5.3.0
Web Tools not correctly reflecting physical switch state of a
persistently disabled switch when the sw itch is fastbooted. LEDs are
shown unlit instead of slowly blinking yellow.
Fixed per Fabric OS 5.3.0
No event is generated when the IP address of a switch is changed,
so user can’t determine IP address of the switch was changed by
issuing the command errdump or errshow because IP a ddress
changeeventwasnotregistered.
Fixed per Fabric OS 5.3.0
S
everal issu es observed in ZoneAdmin and in Admin Domain when
switch is configured in PID format 2, including being unable to see
ports 16-32.
Fixed per Fabric OS 5.3.0
HP StorageWorks Fabric OS 5.3.0c release notes
21