HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

Fabric OS 5.x Advanced Web Tools administrator guide 127
Configuring the e-mail alert recipient
You can set a different e-mail alert configuration for each class. For example, you can set one e-mail
notification for SFPs and another for E_Ports. Before configuring e-mail alert recipients, you must set up the
e-mail notification recipient’s DNS server and domain name. For more information, see ”Configuring the
e-mail server on a switch” on page 126.
Configuring the e-mail alert alarm
1. Launch the Fabric Watch module as described on page 122.
2. Select the Email Configuration tab, as shown in Figure 49.
3. Select the Enable or Disable radio button to enable or disable the e-mail alert status.
When you disable e-mail alerts, Fabric Watch does not send e-mail notification even if the e-mail
notification method is assigned to monitored areas.
4. Enter the e-mail address of the recipient in the Recipient Email Address text box.
Messages are sent to this address when e-mail notification is enabled.
NOTE: E-mail addresses must not exceed 128 characters.
5. Click Apply.
6. Optional: Click Send Test Email to receive a test e-mail so you can verify the e-mail notification is
working correctly.
You can send a test e-mail only after you have applied your settings.
Figure 49 Fabric Watch e-mail configuration