HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

18 Introducing Advanced Web Tools
Installing the Java Plug-in on Windows
1. Select Start Menu > Settings > Control Panel and then select the Java Plug-in Control Panel.
2. Select the About tab.
3. Determine whether the correct Java Plug-in version is installed:
• If the correct version is installed, Advanced Web Tools is ready to use.
• If no Java Plug-in is installed, point the browser toward a switch running Fabric OS 4.x or later,
follow the link to the Sun Microsystems web site, download the correct Java Plug-in, and
double-click the downloaded file to install the plug-in.
• If an outdated version is currently installed, uninstall it, relaunch the browser, and enter the address
of a switch running Fabric OS 4.4.0 or later. Advanced Web Tools guides you through the steps to
download the proper Java Plug-in.
Installing an Advanced Web Tools license
You can install an Advanced Web Tools license either through telnet or over the Web.
All licenses, including Advanced Web Tools licenses, are installed on a chassis basis. For example, if you
install an Advanced Web Tools license on logical switch 0 in a Core Switch 2/64, you do not need to
install an additional Advanced Web Tools license on logical switch 1 of that Core Switch 2/64, because
both are in the same chassis.
To determine whether a license is already installed on a switch, follow the instructions provided in the
section “Installing an Advanced Web Tools license through telnet,” next. If a license is not installed,
contact your switch supplier to obtain a license key.
Installing an Advanced Web Tools license through telnet
Use the following procedure to determine whether an Advanced Web Tools license is installed on your
switch and, if not, install it.
Installing an Advanced Web Tools license through telnet
1. Log in to the switch via telnet (see the HP StorageWorks Fabric OS 5.x administrator guide for more
information), using an account that has administrative privileges.
2. To determine whether an Advanced Web Tools license is already installed on the switch, enter
licenseShow on the telnet command line.
A list is displayed, showing all the licenses currently installed on the switch:
If the Advanced Web Tools license is not included in the list or is incorrect, continue with step 3.
3. On the command line, enter:
licenseadd key
where key is the license key. The license key value is case-sensitive and must be entered exactly as
given.
4. Verify that the license was added by typing the following command:
licenseshow
If the Advanced Web Tools license is listed, the feature is available. If the license is not listed, repeat
step 3.
Installing an Advanced Web Tools license through the web
Launching Advanced Web Tools from any nonlicensed switch opens the license dialog box. If the fabric
already contains at least one licensed switch, you can use Advanced Web Tools to view and license other
switches from the licensed switch.
switch:admin> licenseshow
1A1AaAaaaAAAA1a: ]-- This is the license key. The installed feature is
listed below.
Zoning license
1A3AaAbcbBBCC1d:
QuickLoop license