HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

20 Introducing Advanced Web Tools
Launching Advanced Web Tools
You can launch Advanced Web Tools on any workstation with a compatible web browser installed. For a
list of web browsers compatible with Fabric OS 5.x, see Table 2 on page 16 and Table 3 on page 16.
Advanced Web Tools also supports HTTPS protocol, if that protocol is enabled for the switch. For more
information on enabling the HTTPS protocol on your switch, see the HP StorageWorks Fabric OS 5.x
administrator guide.
Launching Advanced Web Tools
1. Launch the web browser and enter the IP address of the licensed switch in the Address field:
http://10.77.77.77 or https://10.77.77.77
2. Press Enter.
Depending on the switch is configuration, you might be prompted to log in to the switch at this time.
See ”Advanced Web Tools interface” on page 20 for more information.
Advanced Web Tools
Advanced Web Tools launches, as shown in Figure 2. Go to Chapter 3, Using Advanced Web Tools for
instructions on using this interface.
Figure 2 Advanced Web Tools interface