HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

40 Managing your fabrics, switches, and ports
Viewing and printing a switch report
The switch report includes the following information:
• A list of switches in the fabric
• Switch configuration parameters
• A list of ISLs and ports
• Name Server information
• Zoning information
• SFP serial ID information
Viewing or printing a switch report
1. Launch the Switch Admin module as described on page 36.
2. Click the Switch tab.
3. Click View Report.
A switch report is displayed in a new window.
4. View or print the report using your browser.
Rebooting a switch
When you reboot the switch, the reboot takes effect immediately.
Performing a fast boot
A fast boot reduces boot time significantly by bypassing power-on self test (POST).
1. Launch the Switch Admin module as described on page 36.
2. Click the Firmware tab (see Figure 8 on page 38).
3. Select the Fastboot radio button.
4. Click Apply.
Performing a switch reboot
Use the following procedure to reboot the CP and execute the normal power-on booting sequence.
1. Launch the Switch Admin module as described on page 36.
2. Click the Firmware tab (see Figure 8 on page 38).
3. Select the Reboot radio button.
4. Click Apply.
Changing system configuration parameters
When you change system configuration parameters for the Core Switch 2/64 or for a SAN Director
2/128 or 4/256 SAN Director configured with two logical switches, the change is made on a
logical-switch basis. This means that for each logical switch, you must change the system configuration
parameters individually.
You must disable the switch before you can configure fabric parameters.
You can change the following system configuration parameters:
• Switch fabric settings
• Virtual channel settings
• Arbitrated loop parameters
• System services