HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

Fabric OS 5.x Advanced Web Tools administrator guide 49
3. Click the license you want to remove.
4. Click Remove.
Administering high availability
The procedures in this section apply only to the Core Switch 2/64, SAN Director 2/128, and 4/256
SAN Director, because the HA module is available only on these switch types. See the HP StorageWorks
Fabric OS 5.x administrator guide for additional information about HA.
Launching the High Availability module
The background color of the Hi Avail button indicates the overall status of the switch. The High
Availability module displays information about the status of the HA feature on the Core Switch 2/64,
SAN Director 2/128, and 4/256 SAN Director and each CP. It also enables you to perform tasks such
as CP failover or to synchronize services on the CPs.
To launch the High Availability module
1. Select a Core Switch 2/64, SAN Director 2/128, or 4/256 SAN Director from the Fabric Tree.
The selected director appears in the Switch View.
2. Click the Hi Avail button on the Switch View.
The HA Admin module is displayed, as shown in Figure 12.
Figure 12 High availability mode
Note that there is a background color with the HA Status for each CP. The HA Admin module is not
refreshed.
3. Click Refresh to update the information displayed in the HA Admin module.