HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

54 Managing your fabrics, switches, and ports
3. To filter events within a certain time period:
a. Click From and enter the start time and date in the boxes.
b. Click To and enter the finish time and date in the boxes.
4. To filter all events beginning at a certain date and time, click From and enter the start time and date in
the boxes.
5. To filter events up until a certain date and time, click To and enter the finish time and date in the
boxes.
6. Click OK.
The filter is enabled and the enabled filter type is displayed in the events window.
Filtering events by event severity levels
1. Launch the Fabric or Switch Events window as described in ”Displaying fabric events” on page 51 or
”Fabric Events window” on page 52.
2. Click Filter.
The Event Filter dialog box opens.
3. Click Level.
The event severity level check boxes are enabled.
4. Click the event levels you want to display.
5. Click OK.
The filter is enabled and the enabled filter type is displayed in the events window.
Filtering events by message ID
1. Launch the Fabric Events or Switch Events window as described in ”Displaying fabric events” on
page 51 or ”Fabric Events window” on page 52.
2. Click Filter.
The Event Filter dialog box opens.
3. Click Message ID.
4. Enter the message IDs in the associated box.
You can enter multiple message IDs as long as you separate them by commas. You can enter either the
full message ID (moduleID-messageType) or a partial ID (moduleID only).
5. Click OK.
The filter is enabled and the enabled filter type is displayed in the events window.
Filtering events by service component
1. Launch the Fabric Events or Switch Events window as described in ”Displaying fabric events” on
page 51 or ”Fabric Events window” on page 52.
2. Click Filter.
The Event Filter dialog box opens.
3. Click Service.
The event service drop-down list is enabled.
4. Select either Switch or Chassis from the drop-down list to show only those messages from the logical
switch or from the chassis.
5. Click OK.
The filter is enabled and the enabled filter type is displayed in the events window.