HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

Fabric OS 5.x Advanced Web Tools administrator guide 67
Setting SNMPv3 configuration parameters
1. Launch the Switch Admin module as described on page 36.
2. Select the SNMP tab (see Figure 21 on page 66).
3. Select a user name from the User Name drop-down list in the SNMPv3 section.
4. Double-click a recipient IP address in the SNMPv3 section and enter a new IP address.
5. Select a trap level from the Trap Level drop-down list.
6. Click Apply.
Changing the accessControl configuration
1. Launch the Switch Admin module as described on page 36.
2. Click the SNMP tab (see Figure 21 on page 66).
3. Double-click an access host IP address in the Access Control List section and enter a new host IP
address.
4. Select a permission for the host from the Access Control List drop-down list.
Options are Read Only and Read Write.
5. Click Apply.
Managing the RADIUS server
Fabric OS supports RADIUS authentication, authorization, and accounting service (AAA). When
configured for RADIUS, the switch becomes a Network Access Server (NAS) that acts as a RADIUS client.
In this configuration, authentication records are stored in the RADIUS host server database. Login and
logout account name, assigned role, and time accounting records are also stored on the RADIUS server.
You should set up RADIUS service through a secure connection, such as SSH.
Use the AAA Service tab of the Switch Admin module to manage the RADIUS server (see Figure 22).
Figure 22 AAA Service tab