HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

90 Administering zoning
4. Click Rename.
The Rename a QuickLoop dialog box opens.
5. Enter a new QuickLoop name and click OK.
The QuickLoop is renamed in the Zone Admin buffer.
Deleting a QuickLoop
Use the following procedure to delete a QuickLoop.
1. Launch the Zone Admin module as described on page 83.
2. Click the QuickLoop tab.
3. Select the QuickLoop you want to delete from the Name drop-down list.
4. Click Delete.
The Confirm Deleting QuickLoop dialog box opens.
5. Click Yes.
The selected QuickLoop is deleted from the Zone Admin buffer.
Managing Fabric Assist zones
FA is an extension to QuickLoop. An FA zone allows private hosts to communicate with public or private
targets across the fabric.
FA zones can be administered using Fabric OS 5.x; however, the following switches and directors
running Fabric OS 5.x cannot be members of an FA zone:
• Core Switch 2/64
• SAN Director 2/128
• 4/256 SAN Director
• 4/8 SAN Switch
• 4/16 SAN Switch
• SAN Switch 2/8V
• SAN Switch 2/16V
• SAN Switch 2/32
• 4Gb SAN Switch for HP p-Class BladeSystem
• SAN Switch 4/32
NOTE: You must have a QuickLoop license installed to create or modify an FA zone.
Creating a Fabric Assist zone
Use the following procedure to create an FA zone. For this example, the Mixed Zone level is used.
1. Launch the Zone Admin module as described on page 83.
2. Select View > Mixed Zoning (you can select any view except the AL_PA view).
The Mixed View tab is displayed.
3. Click the Fabric Assist tab.
4. Click Create.
The Create New FA dialog box opens.
5. Enter a name for the new FA zone and click OK.
A fabric host is required.
6. Click + signs in the Member Selection List to view the nested elements.
The choices available in the Member Selection List depend on the selection made in the View menu.