HP StorageWorks Fabric OS 5.X Advanced Web Tools Administrator Guide (AA-RVHYB-TE, September 2005)

96 Administering zoning
Displaying the zone configuration summary
The zone configuration summary hierarchically lists all defined zoning elements known to the current Zone
Admin session, whether any of the listed configurations has been enabled, and whether any of the lower
level elements has been added as members of the higher level (aliases, zones, QuickLoops, FA zones)
structures. The zone configuration summary displays the entire contents of the fabric zoning database as it
was at the time the Zone Admin session was launched, or the most recently saved or refreshed
information, and any unsaved changes you make since the time the Zone Admin session is launched. It
provides the name of the zone configuration that was enabled at the time you launched the Zone Admin
session; however, keep in mind that the enabled configuration might have changed since then and that
this screen does not reflect those changes.
Viewing a zone configuration summary report
1. Launch the Zone Admin module as described on page 83.
2. Select File > Print Summary.
The Zone Configuration summary window is displayed, as shown in Figure 30.
It is important to note that the summary displays the information based on the changes just made. If
current Zone Admin session changes have not yet been saved to the fabric, the information displayed
here is different from what is seen from the switch.
3. Optional: Click Print to print the zone configuration summary.
The print dialog box opens.
Figure 30 Zone Configuration summary
Creating a configuration analysis report
The configuration analysis report lists the following:
• SAN components (ports, WWNs, and AL_PAs) that are not included in the configuration
• SAN components (ports, WWNs, and AL_PAs) that are contained in the configuration but not in the
fabric
To create a configuration analysis report
1. Launch the Zone Admin module as described on page 83.
2. Select the Config tab.