HP StorageWorks Fabric OS 5.X MIB Reference Guide (AA-RVHXB-TE, September 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks TAA SAN Switch 2/16 Power Pack

HP StorageWorks

Fabric OS 5.x MIB reference guide

Part number: AA–RVHXB–TE

Second edition: September 2005

Summary of content (278 pages)

PAGE 1
HP StorageWorks Fabric OS 5.
PAGE 2
Legal and notice information © Copyright 2005 Hewlett-Packard Development Company, L.P. © Copyright 2005 Brocade Communications Systems, Incorporated. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
PAGE 3
Contents About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Intended audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Related documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . HP StorageWorks Fabric OS 5.x master glossary . . . . . . . . . Document conventions and symbols . . . . . . . . . . . . . . . . . . HP technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
ifInDiscards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ifInErrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ifInUnknownProtos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ifOutOctets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 5
ipRouteMetric5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ipRouteInfo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP address translation table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ipNetToMediaTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
Additional TCP objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tcpInErrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tcpOutRsts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UDP group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
fcFeModuleObjectID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . fcFeModuleOperStatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . fcFeModuleLastChange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . fcFeModuleFxPortCapacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 8
fcFxPortLinkFailures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . fcFxPortSyncLosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . fcFxPortSigLosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . fcFxPortPrimSeqProtoErrors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
fcFxPortCapHoldTimeMax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 fcFxPortCapHoldTimeMin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 FCFABRIC-ELEMENT-MIB (experimental branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 FCFABRIC-ELEMENT-MIB organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 10
fcFxPortPhysOperStatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . fcFxPortPhysLastChange. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . fcFxPortPhysRttov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fx_Port fabric login table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 11
fcFxPortCapMedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 4 Entity MIB objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Entity MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Entity MIB system organization of MIB objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 12
entityPhysicalGroup . . . . . . . . . . . entityLogicalGroup . . . . . . . . . . . . entityMappingGroup. . . . . . . . . . . entityGeneralGroup . . . . . . . . . . . entityNotificationsGroup . . . . . . . . entityPhysical2Group . . . . . . . . . . entityLogical2Group . . . . . . . . . . . ... ... ... ... ... ... ... .......... .......... .......... .......... .......... .......... .......... ... ... ... ... ... ... ... .. .. .. .. .. .. .. ... ... ... ... ... ... ... .... .... .... .... .... .... ....
PAGE 13
swNumNbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swNbTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swNbEntry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swNbIndex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 14
swFCPortTxMcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 swFCPortLipIns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 swFCPortLipOuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 swFCPortLipLastAlpa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 15
swFwCustChangedActs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swFwCustExceededActs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swFwCustBelowActs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swFwCustAboveActs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 16
swBlmPerfEEDid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swBlmPerfFltMntTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swBlmPerfFltMntEntry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . swBlmPerfFltPort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 17
7 FICON MIB objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 FICON MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SNMP traps for FICON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FICON MIB system organization of MIB objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 18
rLIRConnectedNodeWwn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . rLIRFabricWwn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . rLIRLinkFailureType . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . rLIRTimeStamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 19
connUnitSensorTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . connUnitSensorEntry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . connUnitSensorUnitId . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . connUnitSensorIndex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 20
connUnitLinkAgentAddressY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . connUnitLinkAgentAddressTypeY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . connUnitLinkAgentPortY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . connUnitLinkUnitTypeY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 21
Service group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connectivity unit service scalars group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . connUnitSnsMaxEntry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connectivity unit service tables group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 22
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 SNMP trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 HP MIB tree location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 HP SNMP MIB dependencies and advised installation order . . . . . .
PAGE 23
61 62 63 64 65 Tables 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 ConnUnitLinkTable hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TrapRegTable hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ConnUnitPortStatTable hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 24
PAGE 25
About this guide This guide provides information about: • MIB-II • FE MIB objects • Entity MIB objects • SW MIB objects • High-availability MIB objects • FibreAlliance MIB objects NOTE: FICON is not supported on HP B-Series Fibre Channel switches. The FICON information in this document is included for reference only.
PAGE 26
Document conventions and symbols Document conventions Table 1 Convention Element Medium blue text: Figure 1 Cross-reference links and e-mail addresses Medium blue, underlined text (http://www.hp.
PAGE 27
• Operating system type and revision level • Detailed, specific questions For continuous quality improvement, calls may be recorded or monitored. HP strongly recommends that customers sign up online using the Subscriber's choice web site: http://www.hp.com/go/e-updates. • Subscribing to this service provides you with e-mail updates on the latest product enhancements, newest versions of drivers, and firmware documentation updates as well as instant access to numerous other product resources.
PAGE 28
PAGE 29
1 Understanding HP SNMP The Simple Network Management Protocol (SNMP) is an industry-standard method for monitoring and managing network devices. This protocol promotes interoperability, as SNMP-capable systems must adhere to a common set of framework and language rules. Understanding the components of SNMP makes it possible to use third-party tools to view, browse, and manipulate HP switch variables (MIBs) remotely, as well as to set up an enterprise-level management process.
PAGE 30
Understanding MIBs The MIB is a database of information monitored and managed on a device, in this case an HP StorageWorks switch. The MIB structure can be represented by a tree hierarchy. The root splits into three main branches: International Organization for Standardization (ISO), Consultative Committee for International Telegraph and Telephone (CCITT), and joint ISO/CCITT. These branches have short text strings and integers (OIDs) to identify them.
PAGE 31
Once loaded, the MAX-ACCESS provides access levels between the agent and management station. The access levels are as follows: • Not-accessible: You cannot read or write to this variable. • Read-create: Specifies a tabular object that can be read, modified, or created as a new row in a table. • Read-only - Public: You can only monitor information. • Read-write - Private: You can read or modify this variable.
PAGE 32
SW traps There are six specific traps defined in HP SW-TRAP: • swfault (no longer supported) • swSensorScn (no longer supported) • swFCPortScn: This trap is generated by a port state change. • swEventTrap: This trap is generated by any switch event reported to the system error log. • swFabricWatchTrap: This trap is generated when any Fabric Watch threshold is reached. • swTrackChangesTrap: This trap is generated by a login or a logout.
PAGE 33
MIB loading order Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS section near the top of the MIB. When loading the HP MIBs, see Figure 5 to ensure any MIB dependencies are loading in the correct order. Select one or both Select one FA_v2_2.mib FE_EXP.mib FCMGMT-MIB Fabric OS 2.6.x FCFABRIC-ELEMENT-MIB Fabric OS 2.6.x, 3.0.x RFC1213-MIB MIB-II FA_v3_0.mib FE_RFC2837.mib FCMGMT-MIB Fabric OS 3.x, 4.x, 5.x FIBRE-CHANNEL-FE-MIB Fabric OS 3.1.x, 4.
PAGE 34
• HA_v5_1.mib • FICON_v5_0.mib • FA_v3_0.mib • ENTITY_RFC2737.mib • FE_RFC2837.mib Fabric OS commands for configuring SNMP Use the commands in Table 3 to configure MIBs in the Fabric OS. See the HP StorageWorks Fabric OS 5.x administrator guide for procedures on configuring SNMP on the HP StorageWorks switches. Table 3 Commands for configuring SNMP Command Description snmpConfig Introduced in Fabric OS 4.
PAGE 35
2 MIB-II (RFC1213-MIB) This chapter provides descriptions and other information specific to MIB-II, including the following sections: • MIB II overview next • System group, page 41 • Interfaces group, page 42 • Address translation group, page 46 • IP group, page 47 • ICMP group, page 54 • TCP group, page 57 • UDP group, page 60 • EGP group, page 61 • Transmission group, page 61 • SNMP group, page 62 MIB II overview The descriptions of each of the MIB variables in this chapter come directly from the MIB-II
PAGE 36
- interfaces (1.3.6.1.2.1.
PAGE 37
- ip (1.3.6.1.2.1.
PAGE 38
- icmp (1.3.6.1.2.1.
PAGE 39
- udp - (1.3.6.1.2.1.7) udpInDatagrams (1) udpNoPorts (2) udpInErrors (3) udpOutDatagrams (4) udpTable (5) - udpEntry (1) - udpLocalAddress (1) - udpLocalPort (2) Figure 13 UDP hierarchy - egp - (1.3.6.1.2.1.
PAGE 40
- snmp (1.3.6.1.2.1.
PAGE 41
System group All systems must implement the System Group. If an agent is not configured to have a value for any of the System Group variables, a string of length 0 is returned. sysDescr OID 1.3.6.1.2.1.1.1 Description A textual description of the entity. Note This value should include the full name and version identification of the hardware type, software operating system, and networking software. The value must contain only printable ASCII characters. Default Value = Fibre Channel Switch.
PAGE 42
sysServices OID 1.3.6.1.2.1.1.7 Description A value that indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value 0. Then, for each layer, L, in the range 1 through 7, for which this node performs transactions, 2 raised to (L - 1) is added to the sum. For example, a node that primarily performs routing functions has a value of 4 (23-1). In contrast, a node that is a host and offers application services has a value of 72 (24-1 + 27-1).
PAGE 43
ifIndex OID 1.3.6.1.2.1.2.2.1.1 Description A unique value for each interface. Note The values range between 1 and the value of ifNumber. The value for each interface must remain constant, at least from one reinitialization of the entity's network management system to the next reinitialization. For example, the number of entries inside the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director is 1, 2, or 3 for FCIP; otherwise, the value is 1 or 2. ifDescr OID 1.3.6.1.2.1.2.2.1.
PAGE 44
ifSpeed OID 1.3.6.1.2.1.2.2.1.5 Description An estimate (in bits per second) of the interface's current bandwidth. Note For interfaces that do not vary in bandwidth or interfaces for which no accurate estimation can be made, this object should contain the nominal bandwidth. For Fabric OS 4.x, 2 Gbit/sec returns. fei0 returns 107. lo0 returns 0. fc0 returns 109. ifPhysAddress OID 1.3.6.1.2.1.2.2.1.
PAGE 45
ifInUcastPkts OID 1.3.6.1.2.1.2.2.1.11 Description The number of subnetwork-unicast packets delivered to a higher-layer protocol. ifInNUcastPkts OID 1.3.6.1.2.1.2.2.1.12 Description The number of nonunicast packets (for example, subnetwork-broadcast or subnetwork-multicast) delivered to a higher-layer protocol. ifInDiscards OID 1.3.6.1.2.1.2.2.1.
PAGE 46
ifOutDiscards OID 1.3.6.1.2.1.2.2.1.19 Description The number of outbound packets that were chosen to be discarded (even though no errors had been detected) to prevent their being transmitted. One possible reason for discarding such a packet could be to free buffer space. ifOutErrors OID 1.3.6.1.2.1.2.2.1.20 Description The number of outbound packets that could not be transmitted because of errors. ifOutQLen OID 1.3.6.1.2.1.2.2.1.21 Description The length of the output packet queue (in packets).
PAGE 47
atEntry OID 1.3.6.1.2.1.3.1.1 Description Each entry contains one network address to physical address equivalence. Index atIfIndex, atNetAddress OID 1.3.6.1.2.1.3.1.1.1 Description The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. atIfIndex atPhysAddress OID 1.3.6.1.2.1.3.1.1.2 Description The media-dependent physical address. atNetAddress OID 1.3.6.1.2.
PAGE 48
ipInAddrErrors OID 1.3.6.1.2.1.4.5 Description The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (for example, 0.0.0.0) and addresses of unsupported classes (for example, Class E). For entities that are not IP gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
PAGE 49
Note This counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion. ipOutNoRoutes OID 1.3.6.1.2.1.4.12 Description The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note This counter includes any packets counted in ipForwDatagrams that meet this no-route criterion. Note that this includes any datagrams that a host cannot route because all of its default gateways are down.
PAGE 50
ipFragCreates OID 1.3.6.1.2.1.4.19 Description The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. IP address table The IP address table contains this entity’s IP addressing information. ipAddrTable OID 1.3.6.1.2.1.4.20 Description The table of addressing information relevant to this entity's IP addresses. ipAddrEntry OID 1.3.6.1.2.1.4.20.1 Description The addressing information for one of this entity's IP addresses.
PAGE 51
IP routing table The IP routing table contains an entry for each route currently known to this entity. ipRouteTable OID 1.3.6.1.2.1.4.21 Description This entity’s IP routing table. ipRouteEntry OID 1.3.6.1.2.1.4.21.1 Description A route to a particular destination. Index ipRouteDest ipRouteDest OID 1.3.6.1.2.1.4.21.1.1 Description The destination IP address of this route. Note An entry with a value of 0.0.0.0 is considered a default route.
PAGE 52
Note The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to –1. ipRouteMetric4 OID 1.3.6.1.2.1.4.21.1.6 Description An alternate routing metric for this route. Note The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to –1. ipRouteNextHop OID 1.3.6.1.2.1.4.21.1.
PAGE 53
ipRouteMask OID 1.3.6.1.2.1.4.21.1.11 Description The mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of the following: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.
PAGE 54
ipNetToMediaIfIndex OID 1.3.6.1.2.1.4.22.1.1 Description The interface on which this entry's equivalence is effective. Note The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex. ipNetToMediaPhysAddress OID 1.3.6.1.2.1.4.22.1.2 Description The media-dependent physical address. ipNetToMediaNetAddress OID 1.3.6.1.2.1.4.22.1.3 Description The IpAddress corresponding to the media-dependent physical address.
PAGE 55
icmpInTimeExcds OID 1.3.6.1.2.1.5.4 Description The number of ICMP Time Exceeded messages received. icmpInParmProbs OID 1.3.6.1.2.1.5.5 Description The number of ICMP Parameter Problem messages received. icmpInSrcQuenchs OID 1.3.6.1.2.1.5.6 Description The number of ICMP Source Quench messages received. icmpInRedirects OID 1.3.6.1.2.1.5.7 Description The number of ICMP Redirect messages received. icmpInEchos OID 1.3.6.1.2.1.5.
PAGE 56
icmpOutMsgs OID 1.3.6.1.2.1.5.14 Description The total number of ICMP messages that this entity attempted to send. Note This counter includes all those counted by icmpOutErrors. icmpOutErrors OID 1.3.6.1.2.1.5.15 Description The number of ICMP messages that this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP layer, such as the inability of IP to route the resultant datagram.
PAGE 57
icmpOutTimestamps OID 1.3.6.1.2.1.5.23 Description The number of ICMP Timestamp (request) messages sent. icmpOutTimestampReps OID 1.3.6.1.2.1.5.24 Description The number of ICMP Timestamp Reply messages sent. icmpOutAddrMasks OID 1.3.6.1.2.1.5.25 Description The number of ICMP Address Mask Request messages sent. icmpOutAddrMaskReps OID 1.3.6.1.2.1.5.26 Description The number of ICMP Address Mask Reply messages sent.
PAGE 58
tcpMaxConn OID 1.3.6.1.2.1.6.4 Description The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value –1. tcpActiveOpens OID 1.3.6.1.2.1.6.5 Description The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. tcpPassiveOpens OID 1.3.6.1.2.1.6.
PAGE 59
TCP connection table The TCP connection table contains information about this entity's existing TCP connections. tcpConnTable OID 1.3.6.1.2.1.6.13 Description A table containing TCP connection-specific information. tcpConnEntry OID 1.3.6.1.2.1.6.13.1 Description Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
PAGE 60
tcpConnLocalPort OID 1.3.6.1.2.1.6.13.1.3 Description The local port number for this TCP connection. tcpConnRemAddress OID 1.3.6.1.2.1.6.13.1.4 Description The remote IP address for this TCP connection. tcpConnRemPort OID 1.3.6.1.2.1.6.13.1.5 Description The remote port number for this TCP connection. Additional TCP objects tcpInErrs OID 1.3.6.1.2.1.6.14 Description The total number of segments received in error (for example, bad TCP checksums). tcpOutRsts OID 1.3.6.1.2.1.6.
PAGE 61
UDP listener table The UDP listener table contains information about this entity’s UDP end-points on which a local application is currently accepting datagrams. udpTable OID 1.3.6.1.2.1.7.5 Description A table containing UDP listener information. udpEntry OID 1.3.6.1.2.1.7.5.1 Description Information about a particular current UDP listener. Index udpLocalAddress, udpLocalPort udpLocalAddress OID 1.3.6.1.2.1.7.5.1.1 Description The local IP address for this UDP listener.
PAGE 62
SNMP group Implementation of the SNMP group is mandatory for all systems that support an SNMP protocol entity. Some of the objects defined next are zero-valued in those SNMP implementations that are optimized to support only those functions specific to either a management agent or a management station. All of the objects that follow refer to an SNMP entity. There might be several SNMP entities residing on a managed node (for example, if the node is acting as a management station). snmpInPkts OID 1.3.6.1.
PAGE 63
snmpInNoSuchNames OID 1.3.6.1.2.1.11.9 Description The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is noSuchName. snmpInBadValues OID 1.3.6.1.2.1.11.10 Description The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is badValue. snmpInReadOnlys OID 1.3.6.1.2.1.11.
PAGE 64
snmpInGetNexts OID 1.3.6.1.2.1.11.16 Description The total number of SNMP Get-Next PDUs that have been accepted and processed by the SNMP protocol entity. snmpInSetRequests OID 1.3.6.1.2.1.11.17 Description The total number of SNMP Set-Request PDUs that have been accepted and processed by the SNMP protocol entity. snmpInGetResponses OID 1.3.6.1.2.1.11.18 Description The total number of SNMP Get-Response PDUs that have been accepted and processed by the SNMP protocol entity. snmpInTraps OID 1.3.
PAGE 65
snmpOutGetRequests OID 1.3.6.1.2.1.11.25 Description The total number of SNMP Get-Request PDUs that have been generated by the SNMP protocol entity. snmpOutGetNexts OID 1.3.6.1.2.1.11.26 Description The total number of SNMP Get-Next PDUs that have been generated by the SNMP protocol entity. snmpOutSetRequests OID 1.3.6.1.2.1.11.27 Description The total number of SNMP Set-Request PDUs that have been generated by the SNMP protocol entity. snmpOutGetResponses OID 1.3.6.1.2.1.11.
PAGE 66
MIB-II (RFC1213-MIB)
PAGE 67
3 FE MIB objects This chapter provides descriptions and other information specific to FE MIB object types and includes the following information: • FE MIB overview next • FIBRE-CHANNEL-FE-MIB (MIB-II branch), page 67 • FCFABRIC-ELEMENT-MIB (experimental branch), page 90 FE MIB overview HP supports two versions of the FE MIB: • FIBRE-CHANNEL-FE-MIB (RFC2837) in the MIB-II branch. • FCFABRIC-ELEMENT-MIB in the experimental branch. The version of the FE MIB supported depends on the version of the Fabric OS.
PAGE 68
FIBRE-CHANNEL-FE-MIB organization Figure 16 through Figure 21 depict the organization and structure of FIBRE-CHANNEL-FE-MIB. - iso (1) - org (3) - dod (6) - internet (1) - mgmt (2) - mib-2 (1) - fcFeMIB (75) - fcFeMIBObjects (1) - fcFeConfig (1) - fcFeStatus (2) - fcFeError (3) - fcFeAccounting (4) - fcFeCapabilities (5) - fcFeMIBConformance (2) - fcFeMIBCompliances (1) - fcFeMIBGroups (2) Figure 16 fcFeMIB hierarchy - fcFeConfig (1.3.6.1.2.1.75.1.
PAGE 69
- fcFeStatus (1.3.6.1.2.1.75.1.
PAGE 70
- fcFeAccounting (1.3.6.1.2.1.75.1.
PAGE 71
Table 6 FIBRE-CHANNEL-FE-MIB definitions Type definition Value Description Display string Octet string of size 0 to 255 Textual information taken from the NVT ASCII character set as defined on pages 4, 10 and 11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: • The use of character codes 0-127 (decimal). • The graphic characters (32-126) are interpreted as U.S. ASCII. • NUL, LF, CR, BEL, BS, HT, VT, and FF have the special meanings specified in RFC 854.
PAGE 72
Table 6 FIBRE-CHANNEL-FE-MIB definitions (continued) Type definition Value Description FcAddressId Octet string of size 3 A 24-bit value unique within the address space of a fabric. FcRxDataFieldSize Integer from 128 to 2112 Receive data field size of an Nx_Port or Fx_Port. FcBbCredit Integer from 0 to 32767 Buffer-to-buffer credit of an Nx_Port or Fx_Port. FcphVersion Integer from 0 to 255 Version of FC-PH supported by an Nx_Port or Fx_Port.
PAGE 73
Table 6 FIBRE-CHANNEL-FE-MIB definitions (continued) Type definition Value Description Fc0Medium Integer 1 (unknown) 2 (sm) 4 (m5) 8 (m6) 16 (tv) 32 (mi) 64 (stp) 128 (tw) 256 (lv) Fc0TxType Integer 1 2 3 4 5 6 Fc0Distance Integer The FC-0 distance range associated with a port transmitter: 1 2 3 4 (unknown) (longWaveLaser (LL)) (shortWaveLaser (SL)) (longWaveLED (LE)) (electrical (EL)) (shortWaveLaser-noOFC (SN)) (unknown) (long) (intermediate) (short) FcFeModuleCapacity Integer from 1 to 2
PAGE 74
fcFeConfig group This group consists of scalar objects and tables. It contains the configuration and service parameters of the FE and the Fx_Ports. The group represents a set of parameters associated with the FE or an Fx_Port to support its Nx_Ports. fcFeFabricName OID 1.3.6.1.2.1.75.1.1.1 Description The Name_Identifier of the fabric to which this FE belongs. Note Returns the WWN of the primary switch in the fabric. fcFeElementName OID 1.3.6.1.2.1.75.1.1.
PAGE 75
fcFeModuleDescr OID 1.3.6.1.2.1.75.1.1.4.1.2 Description A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Note See ”sysDescr” on page 41. fcFeModuleObjectID OID 1.3.6.1.2.1.75.1.1.4.1.3 Description The vendor’s authoritative identification of the module. This value might be allocated within the SMI enterprises subtree (1.3.6.1.4.
PAGE 76
fcFeModuleName OID 1.3.6.1.2.1.75.1.1.4.1.7 Description The Name_Identifier of the module. Note The return value is the WWN of the switch. Fx_Port table This table contains the port configuration parameters, one entry for each Fx_Port. fcFxPortTable OID 1.3.6.1.2.1.75.1.1.5 Description A table that contains configuration and service parameters of the Fx_Ports, one entry for each Fx_Port in the FE. fcFxPortEntry OID 1.3.6.1.2.1.75.1.1.5.
PAGE 77
fcFxPortBbCredit OID 1.3.6.1.2.1.75.1.1.5.1.5 Description The total number of receive buffers available for holding Class 1 connect-request, and Class 2 or 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the attached Nx_Port (if applicable) to Fx_Port. fcFxPortRxBufSize OID 1.3.6.1.2.1.75.1.1.5.1.6 Description The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port. fcFxPortRatov OID 1.3.6.1.2.1.75.1.1.5.1.
PAGE 78
fcFxPortClass3SeqDeliv OID 1.3.6.1.2.1.75.1.1.5.1.13 Description A flag indicating whether Class 3 Sequential Delivery is supported by the Fx_Port. Other Fx_Port parameters fcFxPortHoldTime OID 1.3.6.1.2.1.75.1.1.5.1.14 Description The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter.
PAGE 79
fcFxPortOperMode OID 1.3.6.1.2.1.75.1.2.1.1.3 Description The current operational mode of the Fx_Port is unknown (1); fPort (2); flPort (3). fcFxPortAdminMode OID 1.3.6.1.2.1.75.1.2.1.1.4 Description The desired operational mode of the Fx_Port. Fx_Port physical level table This table contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the FE. fcFxPortPhysTable OID 1.3.6.1.2.1.75.1.2.
PAGE 80
fcFxPortPhysOperStatus OID 1.3.6.1.2.1.75.1.2.2.1.2 Description The current operational status of the Fx_Port. Possible values are: • online (1): Login might proceed. • offline (2): Login cannot proceed. • testing (3): Port is under test. • linkFailure (4): Failure after online/testing. The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
PAGE 81
fcFxPortFcphVersionAgreed OID 1.3.6.1.2.1.75.1.2.3.1.2 Description The version of FC-PH that the Fx_Port has agreed to support from the fabric login. fcFxPortNxPortBbCredit OID 1.3.6.1.2.1.75.1.2.3.1.3 Description The total number of buffers available for holding a Class 1 connect-request and Class 2 or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port.
PAGE 82
fcFxPortClass2SeqDelivAgreed OID 1.3.6.1.2.1.75.1.2.3.1.8 Description Indicates whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. This is meaningful only if Class 2 service has been agreed to. Possible values are: • yes (1): The Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. • no (2): The Fx_Port has not agreed to support Class 2 sequential delivery from the fabric login. fcFxPortClass3SeqDelivAgreed OID 1.3.6.1.2.1.75.1.2.3.
PAGE 83
Fx_Port error table This table contains counters that record numbers of errors detected since the management agent reinitialized, one entry for each Fx_Port in the FE. The first six columnar objects after the port index correspond to the counters in the Link Error Status Block. fcFxPortErrorTable OID 1.3.6.1.2.1.75.1.3.1 Description A table that contains counters that record the numbers of errors detected, one entry for each Fx_Port. fcFxPortErrorEntry OID 1.3.6.1.2.1.75.1.3.1.
PAGE 84
fcFxPortDelimiterErrors OID 1.3.6.1.2.1.75.1.3.1.1.7 Description The number of delimiter errors detected by this Fx_Port. fcFxPortAddressIdErrors OID 1.3.6.1.2.1.75.1.3.1.1.8 Description The number of address identifier errors detected by this Fx_Port. fcFxPortLinkResetIns OID 1.3.6.1.2.1.75.1.3.1.1.9 Description The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port. fcFxPortLinkResetOuts OID 1.3.6.1.2.1.75.1.3.1.1.
PAGE 85
fcFxPortC1AccountingEntry OID 1.3.6.1.2.1.75.1.4.1.1 Description An entry containing Class 1 accounting information for each Fx_Port. Index fcFeModuleIndex, fcFePortIndex fcFxPortC1InFrames OID 1.3.6.1.2.1.75.1.4.1.1.1 Description The number of Class 1 frames (other than Class 1 connect-request) received by this Fx_Port from its attached Nx_Port. fcFxPortC1OutFrames OID 1.3.6.1.2.1.75.1.4.1.1.
PAGE 86
fcFxPortC1OutConnections OID 1.3.6.1.2.1.75.1.4.1.1.9 Description The number of Class 1 connections successfully established in which the attached Nx_Port is the destination of the connect-request. fcFxPortC1ConnTime OID 1.3.6.1.2.1.75.1.4.1.1.10 Description The cumulative time that this Fx_Port has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset.
PAGE 87
fcFxPortC2Discards OID 1.3.6.1.2.1.75.1.4.2.1.5 Description The number of Class 2 frames discarded by this Fx_Port. fcFxPortC2FbsyFrames OID 1.3.6.1.2.1.75.1.4.2.1.6 Description The number of F_BSY frames generated by this Fx_Port against Class 2 frames. fcFxPortC2FrjtFrames OID 1.3.6.1.2.1.75.1.4.2.1.7 Description The number of F_RJT frames generated by this Fx_Port against Class 2 frames. Class 3 accounting table fcFxPortC3AccountingTable OID 1.3.6.1.2.1.75.1.4.
PAGE 88
fcFxPortC3Discards OID 1.3.6.1.2.1.75.1.4.3.1.5 Description The number of Class 3 frames discarded by this Fx_Port. fcFeCapability group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used as expressed in its respective object value in the Configuration group. Implementation of this group is optional. Fx_Port capability table fcFxPortCapTable OID 1.3.6.1.2.1.75.1.5.
PAGE 89
fcFxPortCapRxDataFieldSizeMax OID 1.3.6.1.2.1.75.1.5.1.1.5 Description The maximum size (in bytes) of the data field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port. fcFxPortCapRxDataFieldSizeMin OID 1.3.6.1.2.1.75.1.5.1.1.6 Description The minimum size (in bytes) of the data field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port. fcFxPortCapCos OID 1.3.6.1.2.1.75.1.5.1.1.
PAGE 90
fcFxPortCapHoldTimeMin OID 1.3.6.1.2.1.75.1.5.1.1.13 Description The minimum holding time (in microseconds) that the Fx_Port is capable of supporting. FCFABRIC-ELEMENT-MIB (experimental branch) NOTE: The FCFABRIC-ELEMENT-MIB is supported only in Fabric OS 2.6.x and 3.0.x.
PAGE 91
- iso (1) - org (3) - dod (6) - internet (1) - experimental (3) - fibreChannel (42) - fcFabric (2) - fcFe (1) - fcFeConfig (1) - fcFabricName (1) - fcElementName (2) - fcFeModuleCapacity (3) - fcFeModuleTable (4) - fcFxConfTable (5) - fcFeOp (2) - fcFxPortOperTable (1) - fcFxPortPhysTable (3) - fcFxlogiTable (4) - fcFeError (3) - fcFxPortErrorTable (1) - fcFeAcct (4) - fcFxPortC1AcctTable (1) - fcFxPortC2AcctTable (2) - fcFxPortC3AcctTable (3) - fcFeCap (5) - fcFxPortCapTable (1) Figure 22 FCFABRIC-ELEMENT
PAGE 92
- fcFeOp (1.3.6.1.3.42.2.1.
PAGE 93
- fcFeAcct (1.3.6.1.3.42.2.1.4) (-- Not Supported --) Figure 26 fcFeAcct hierarchy - fcFeCap (1.3.6.1.3.42.2.1.
PAGE 94
Table 7 FCFABRIC-ELEMENT-MIB definitions Type definition Value Description Display string Octet string of size 0 to 255 Textual information taken from the NVT ASCII character set as defined on pages 4, 10 and 11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: • The use of character codes 0-127 (decimal). • The graphic characters (32-126) are interpreted as U.S. ASCII. • NUL, LF, CR, BEL, BS, HT, VT, and FF have the special meanings specified in RFC 854.
PAGE 95
Table 7 FCFABRIC-ELEMENT-MIB definitions (continued) Type definition Value Description FcStackedConnMode Integer from 1 to 3 1 (none) 2 (transparent) 3 (lockedDown) FcCosCap Integer from 1 to 127 bit bit bit bit bit bit bit bit Fc0BaudRate Integer according to FC-0 baud rates 1 (other)None of below 2 (one-eighth)155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.
PAGE 96
Table 7 FCFABRIC-ELEMENT-MIB definitions (continued) Type definition Value Description Fc0Distance Integer The FC-0 distance range associated with a port transmitter: 1 2 3 4 (unknown) (long) (intermediate) (short) FcFeModuleCapacity Integer from 1 to 256 The maximum number of modules within a fabric element FcFeFxPortCapacity Integer from 1 to 256 The maximum number of Fx_Ports within a module FcFeModuleIndex Integer from 1 to 256 The module index within a conceptual table FcFeFxPortIndex
PAGE 97
fc FE module table This table contains information about the fc Fe modules, one entry for each module. fcFeModuleTable OID 1.3.6.1.3.42.2.1.1.4 Description A table that contains information about the modules, one entry for each module. fcFeModuleEntry OID 1.3.6.1.3.42.2.1.1.4.1 Status Mandatory Description An entry containing the configuration parameters of a module. Index fcFeModuleIndex fcFeModuleIndex OID 1.3.6.1.3.42.2.1.1.4.1.
PAGE 98
fcFeModuleLastChange OID 1.3.6.1.3.42.2.1.1.4.1.5 Description Contains the value of ”sysUpTime” on page 41 when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted. fcFeModuleFxPortCapacity OID 1.3.6.1.3.42.2.1.1.4.1.6 Description The number of Fx_Port that can be contained within the module.
PAGE 99
fcFxPortName OID 1.3.6.1.3.42.2.1.1.5.1.3 Description The name identifier of this Fx_Port. Each Fx_Port has a unique port name within the address space of the fabric. Note The return value is the WWN of the port. fcFxPortFcphVersionHigh OID 1.3.6.1.3.42.2.1.1.5.1.4 Description The highest or most recent version of FC-PH that the Fx_Port is configured to support. fcFxPortFcphVersionLow OID 1.3.6.1.3.42.2.1.1.5.1.
PAGE 100
fcFxPortIntermixSupported OID 1.3.6.1.3.42.2.1.1.5.1.11 Description A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. Possible values are yes (1) or no (2). fcFxPortStackedConnMode OID 1.3.6.1.3.42.2.1.1.5.1.12 Description A value indicating the mode of Stacked Connect supported by the Fx_Port. fcFxPortClass2SeqDeliv OID 1.3.6.1.3.42.2.1.1.5.1.13 Description A flag indicating whether Class 2 sequential delivery is supported by the Fx_Port.
PAGE 101
fcFxPortDistance OID 1.3.6.1.3.42.2.1.1.5.1.19 Description The FC-0 distance range of the Fx_Port transmitter. fcFeOp group This group consists of tables that contain operational status and established service parameters for the FE and the attached Nx_Ports. NOTE: Implementation of this group is mandatory. Fx_Port operation table This table contains one entry for each Fx_Port, the operational status, and parameters of the Fx_Ports. fcFxPortOperTable OID 1.3.6.1.3.42.2.1.2.
PAGE 102
fcFPortAttachedPortName OID 1.3.6.1.3.42.2.1.2.1.1.4 Description The port name of the attached N_Port, if applicable. If the value of this object is ‘0000000000000000’H, this Fx_Port has no Nx_Port attached to it. This variable has been deprecated and might be implemented for backward compatibility. fcFPortConnectedPort OID 1.3.6.1.3.42.2.1.2.1.1.5 Description The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection.
PAGE 103
fcFxPortPhysModuleIndex OID 1.3.6.1.3.42.2.1.2.3.1.1 Description Identifies the module containing the Fx_Port for which this entry contains information. fcFxPortPhysFxPortIndex OID 1.3.6.1.3.42.2.1.2.3.1.2 Description Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. fcFxPortPhysAdminStatus OID 1.3.6.1.3.42.2.1.2.3.1.
PAGE 104
fcFxPortPhysRttov OID 1.3.6.1.3.42.2.1.2.3.1.6 Description The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect Loss of Synchronization. Fx_Port fabric login table This table contains one entry for each Fx_Port in the FE, and the Service Parameters that have been established from the most recent fabric login, whether implicit or explicit. fcFxlogiTable OID 1.3.6.1.3.42.2.1.2.
PAGE 105
fcFxPortNxPortBbCredit OID 1.3.6.1.3.42.2.1.2.4.1.5 Description The total number of buffers available for holding Class 1 connect-request Class 2 or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel. fcFxPortNxPortRxDataFieldSize OID 1.3.6.1.3.42.2.1.2.4.1.
PAGE 106
fcFxPortNxPortName OID 1.3.6.1.3.42.2.1.2.4.1.12 Description The port name of the attached Nx_Port, if applicable. If the value of this object is ‘0000000000000000’H, this Fx_Port has no Nx_Port attached to it. fcFxPortConnectedNxPort OID 1.3.6.1.3.42.2.1.2.4.1.13 Description The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection.
PAGE 107
fcFxPortErrorFxPortIndex OID 1.3.6.1.3.42.2.1.3.1.1.2 Description Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. fcFxPortLinkFailures OID 1.3.6.1.3.42.2.1.3.1.1.3 Description The number of link failures detected by this Fx_Port. fcFxPortSyncLosses OID 1.3.6.1.3.42.2.1.3.1.1.
PAGE 108
fcFxPortLinkResetIns OID 1.3.6.1.3.42.2.1.3.1.1.11 Description The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port. fcFxPortLinkResetOuts OID 1.3.6.1.3.42.2.1.3.1.1.12 Description The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port. fcFxPortOlsIns OID 1.3.6.1.3.42.2.1.3.1.1.13 Description The number of Offline Sequence errors received by this Fx_Port. fcFxPortOlsOuts OID 1.3.6.1.3.42.2.1.3.1.1.
PAGE 109
fcFxPortCapFxPortIndex OID 1.3.6.1.3.42.2.1.5.1.1.2 Description Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. fcFxPortCapFcphVersionHigh OID 1.3.6.1.3.42.2.1.5.1.1.3 Description The highest or most recent version of FC-PH that the Fx_Port is capable of supporting. fcFxPortCapFcphVersionLow OID 1.3.6.1.3.42.2.1.5.1.1.
PAGE 110
fcFxPortCapIntermix OID 1.3.6.1.3.42.2.1.5.1.1.10 Description A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is valid only if the port is capable of supporting Class 1 service. Possible values are yes (1) or no (2). fcFxPortCapStackedConnMode OID 1.3.6.1.3.42.2.1.5.1.1.11 Description A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting.
PAGE 111
4 Entity MIB objects This chapter provides descriptions and other information specific to Entity MIB object types and includes the following information: • Entity MIB overview next • Entity MIB objects, page 115 • Entity MIB trap, page 128 • Entity MIB conformance information, page 129 Entity MIB overview Entity MIB is the module for representing multiple logical entities supported by a single SNMP agent. This MIB is supported only in Fabric OS 4.x.
PAGE 112
- entityPhysical (1.3.6.1.2.1.47.1.
PAGE 113
- entityMIBTraps (1.3.6.1.2.1.47.2) - entityMIBTrapPrefix (0) - entConfigChange (1) Figure 33 entityMIBTrapPrefix hierarchy - entityConformance (1.3.6.1.2.1.47.
PAGE 114
Textual conventions PhysicalIndex Status Current Description Arbitrary value that uniquely identifies the physical entity. Value should be a small positive integer; index values for different physical entities are not necessarily contiguous. Syntax Integer (1... 2147483647) PhysicalClass Status Current Description An enumerated value that provides an indication of the general hardware type of a particular physical entity.
PAGE 115
SnmpEngineIdOrNone Status Current Description A specially formatted SnmpEngineID string for use with the Entity MIB. If an instance of an object with syntax SnmpEngineIdOrNone has a non-zero length, then the object encoding and semantics are defined by the SnmpEngineID textual convention (see RFC2571). If an instance of an object with syntax SnmpEngineIdOrNone contains a zero-length string, then no appropriate SnmpEngineID is associated with the logical entity (that is, SNMPv3 not supported).
PAGE 116
Table 10 entPhysical table entries for HP StorageWorks switches HP StorageWorks platform Blades Fans Power supplies WWN card 4/8 SAN Switch and 4/16 SAN Switch 1 3 fans not a FRU 1 PS not a FRU 1 WWN unit not a FRU SAN Switch 2/8V 1 3 fans not a FRU 1 PS not a FRU 1 WWN unit not a FRU SAN Switch 2/16V 1 4 fans not a FRU 2 PS not a FRU 1 WWN unit not a FRU SAN Switch 2/32 1 6 fans in 3 FRUs 2 PS 1 WWN unit not a FRU SAN Switch 4/32 1 3 FRUs 2 PS 1 WWN unit not a FRU Core Switc
PAGE 117
entPhysicalEntry OID 1.3.6.1.2.1.47.1.1.1.1 Status Current Description Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table. Index entPhysicalIndex entPhysicalIndex OID 1.3.6.1.2.1.47.1.1.1.1.
PAGE 118
entPhysicalContainedIn OID 1.3.6.1.2.1.47.1.1.1.1.4 Status Current Description The value of entPhysicalIndex for the physical entity that contains this physical entity. A value of 0 indicates this physical entity is not contained in any other physical entity. Note that the set of containment relationships defines a strict hierarchy; that is, recursion is not allowed.
PAGE 119
entPhysicalParentRelPos OID 1.3.6.1.2.1.47.1.1.1.1.6 Status Current Description An indication of the relative position of this child component among all its sibling components. Sibling components are defined as entPhysicalEntries that share the same instance values of each of the entPhysicalContainedIn and entPhysicalClass objects. Note For chassis entry, this value is –1; for containers, it is the sequential number of the container from the first one; for all FRUs, it is always 1.
PAGE 120
Note The name provides the type of the entry and its number (for example, slot 1, power supply, and so forth). The description gives the textual description of the type of the entry (for example, power supply, module, and so forth). entPhysicalHardwareRev OID 1.3.6.1.2.1.47.1.1.1.1.8 Status Current Description The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present).
PAGE 121
On the first instantiation of a physical entity, the value of entPhysicalSerialNum associated with that entity is set to the correct vendor-assigned serial number, if this information is available to the agent. If a serial number is unknown or nonexistent, the entPhysicalSerialNum is set to a zero-length string instead. Note that implementations that can correctly identify the serial numbers of all installed physical entities do not need to provide write access to the entPhysicalSerialNum object.
PAGE 122
entPhysicalAlias OID 1.3.6.1.2.1.47.1.1.1.1.14 Status Current Description This object is an alias name for the physical entity as specified by a network manager; it provides a nonvolatile handle for the physical entity. On the first instantiation of a physical entity, the value of entPhysicalAlias associated with that entity is set to the zero-length string. However, the agent might set the value to a locally unique default value instead of a zero-length string.
PAGE 123
Logical entity group This section lists the entityLogical MIBs. entLogicalTable OID 1.3.6.1.2.1.47.1.2.1 Description This table contains one row per logical entity. For agents that implement more than one naming scope, at least one entry must exist. Agents that instantiate all MIB objects within a single naming scope are not required to implement this table. entLogicalEntry OID 1.3.6.1.2.1.47.1.2.1.1 Description Information about a particular logical entity.
PAGE 124
entLogicalCommunity OID 1.3.6.1.2.1.47.1.2.1.1.4 Description An SNMPv1 or SNMPv2C community string, which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and might also return a community string based on the privileges of the request used to read this object.
PAGE 125
entLogicalContextEngineID OID 1.3.6.1.2.1.47.1.2.1.1.7 Description The authoritative ContextEngineID that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated entLogicalTAddress/entLogicalTDomain pair. This object, together with the associated entLogicalContextName object, defines the context associated with a particular logical entity; it allows access to SNMP engines identified by a ContextEngineId and contextName pair.
PAGE 126
entLPMappingEntry OID 1.3.6.1.2.1.47.1.3.1.1 Description Information about an association of a logical entity to physical equipment. Note that the nature of the association is not specifically identified in this entry. It is expected that sufficient information exists in the MIBs used to manage a particular logical entity to infer how the physical component information is utilized. Index entLogicalIndex entLPPhysicalIndex entLPPhysicalIndex OID 1.3.6.1.2.1.47.1.3.1.1.
PAGE 127
For example, to indicate that a particular interface (such as physical component 33) is identified by the same value of ifIndex for all logical entities, the following instance might exist: entAliasMappingIdentifier.33.0 = ifIndex.5 In the event an entPhysicalEntry is associated differently for some logical entities, additional entAliasMapping entries might exist: entAliasMappingIdentifier.33.0 = ifIndex.6 entAliasMappingIdentifier.33.4 = ifIndex.1 entAliasMappingIdentifier.33.5 = ifIndex.
PAGE 128
entPhysicalChildIndex OID 1.3.6.1.2.1.47.1.3.3.1.1 Description The value of entPhysicalIndex for the contained physical entity. Through this the containment hierarchy of the physical entities is displayed (see Figure 35 on page 116). General group This section lists the entityGeneral MIB. entLastChangeTime OID 1.3.6.1.2.1.47.1.4.
PAGE 129
Entity MIB conformance information This section lists the entityConformance MIBs. Figure 34 on page 113 shows the structure of the entityConformance group. entityCompliance OID 1.3.6.1.2.1.47.3.1.1 Status Deprecated Description The compliance statement for SNMP entities that implement version 1 of the Entity MIB. Module This module MANDATORY-GROUPS { entityPhysicalGroup, entityLogicalGroup, entityMappingGroup, entityGeneralGroup, entityNotificationsGroup entity2Compliance OID 1.3.6.1.2.1.47.3.1.
PAGE 130
Object entPhysicalAlias Access Read-only Description Write access is required only if the associated entPhysicalClass value is equal to chassis(3). Object entPhysicalAssetID Access Not-accessible Description Read and write access is not required for agents that cannot provide nonvolatile storage for NMS-assigned asset identifiers. Write access is not required for physical entities for which the associated value of entPhysicalIsFRU is equal to false(2). entityPhysicalGroup OID 1.3.6.1.2.1.47.3.
PAGE 131
entityGeneralGroup OID 1.3.6.1.2.1.47.3.2.4 Objects entLastChangeTime Status Current Description The collection of objects that represent general entity information for which a single agent provides management information. entityNotificationsGroup OID 1.3.6.1.2.1.47.3.2.5 Notifications entConfigChange Status Current Description The collection of notifications used to indicate Entity MIB data consistency and general status information. entityPhysical2Group OID 1.3.6.1.2.1.47.3.2.
PAGE 132
Entity MIB objects
PAGE 133
5 SW MIB objects This chapter contains descriptions and other information specific to FC Switch MIB (SW-MIB) object types.
PAGE 134
- iso (1) - org (3) - dod (6) - internet (1) - private (4) - enterprises (1) - bsci (1588) - commDev (2) - fibreChannel (1) - fcSwitch (1) - sw (1) - swTrapsV2 (0) - swSystem (1) - swFabric (2) - swModule (3) - swAgtCfg (4) - swFCport (6) - swNs (7) - swEvent (8) - swFwSystem (10) - swEndDevice (21) - swGroup (22) - swBlmPerfMnt (23) - swTrunk (24) - sw28k (2) - sw21kN24k (3) - sw20x0 (4) - bsciReg (3) - bsciModules (1) - sw21kN24k (3) - sw20x0 (4) Figure 36 SW-MIB overall tree structure - swTrapsV2 (1.3.
PAGE 135
- swSystem (1.3.6.1.4.1.1588.2.1.1.1.
PAGE 136
- swModule (1.3.6.1.4.1.1588.2.1.1.1.3) Figure 40 swModule hierarchy - swAgtCfg (1.3.6.1.4.1.1588.2.1.1.1.4) - swAgtCmtyTable (11) - swAgtCmtyEntry (1) - swAgtCmtyIdx (1) - swAgtCmtyStr (2) - swAgtTrapRcp (3) - swAgtTrapSeverityLevel (4) Figure 41 swAgtCfh hierarchy - swFCport (1.3.6.1.4.1.1588.2.1.1.1.
PAGE 137
- swNs (1.3.6.1.4.1.1588.2.1.1.1.7) - swNsLocalNumEntry (1) - swNsLocalTable (2) - swNsLocalEntry (1) - swNsEntryIndex (1) - swNsPortID (2) - swNsPortType (3) - swNsPortName (4) - swNsPortSymb (5) - swNsNodeName (6) - swNsNodeSymb (7) - swNsIPA (8) - swNsIpAddress (9) - swNsCos (10) - swNsFc4 (11) - swNsIpNxPort (12) - swNsWwn (13) - swNsHardAddr (14) Figure 43 swNs hierarchy - swEvent (1.3.6.1.4.1.1588.2.1.1.1.
PAGE 138
- swFwSystem (1.3.6.1.4.1.1588.2.1.1.1.
PAGE 139
- swGroup (1.3.6.1.4.1.1588.2.1.1.1.22) - swGroupTable (1) - swGroupEntry (1) - swGroupIndex (1) - swGroupName (2) - swGroupType (3) - swGroupMemTable (1) - swGroupMemEntry (1) - swGroupID (1) - swGroupMemWwn (2) - swGroupMemPos (3) Figure 47 swGroup hierarchy - swBlmPerfMnt (1.3.6.1.4.1.1588.2.1.1.1.
PAGE 140
Table 11 SW-MIB text conventions Type definition Value Description FcWwn Octet string of size 8 The WWN of HP-specific products and ports. SwDomainIndex Integer of size 1 to 239 Fibre Channel domain ID of the switch. SwNbIndex Integer of size 1 to 2048 Index of the neighbor interswitch link (ISL) entry. SwSensorIndex Integer of size 1 to 1024 Index of the sensor entry. SwPortIndex Integer32 Index of the port, starting from 1 up to the maximum number of ports on the HP StorageWorks switch.
PAGE 141
Table 11 SW-MIB text conventions (continued) Type definition Value Description SwFwClassesAreas Integer Classes and area index: 1swFwEnvTemp 2swFwEnvFan 3swFwEnvPs 4swFwTransceiverTemp 5swFwTransceiverRxp 6swFwTransceiverTxp 7swFwTransceiverCurrent 8swFwPortLink 9swFwPortSync 10swFwPortSignal 11swFwPortPe 12swFwPortWords 13swFwPortCrcs 14swFwPortRXPerf 15swFwPortTXPerf 16swFwPortState 17swFwFabricEd 18swFwFabricFr 19swFwFabricDi 20swFwFabricSc 21swFwFabricZc 22swFwFabricFq 23swFwFabricFl 24swFwFabric
PAGE 142
SW-MIB text conventions (continued) Table 11 Type definition Value Description SwFwEvent Integer Possible events available: 1started 2changed 3exceeded 4below 5above 6inBetween SwFwBehavior Integer Behavior type for thresholds: 1triggered 2continuous SwFwState Integer State type for last events: 1swFwInformative 2swFwNormal 3swFwfaulty SwFwLicense Integer License state: 1swFwLicensed 2swFwNotLicensed sw traps This section contains descriptions and other information that is specific to sw Tr
PAGE 143
swFault This trap is no longer generated. Trap # 1 OID 1.3.6.1.4.1.1588.2.1.1.1.0.1 Enterprise sw Variables swDiagResult, swSsn Description A swFault (1) is generated whenever the diagnostics detect a fault with the switch. Sample Diagnostics: #TYPE Switch is faulty. #SUMMARY Faulty reason: %d and SSN is #%s #ARGUMENTS 0, 1 #SEVERITY Critical #TIMEINDEX 1 #STATE Nonoperational swSensorScn (Obsoleted by swFabricWatchTrap) Trap # 2 OID 1.3.6.1.4.1.1588.2.1.1.1.0.
PAGE 144
Description Note A swFCPortScn (3) is generated whenever an FC_Port changes its operational state: for instance, when the FC_Port goes from online to offline. The VarBind in the Trap Data Unit contain the corresponding instance of the FC_Port's operational status, index, swFCPortName, and swSsn. swFCPortName and swSsn are optional. #TYPE A Fibre Channel Port changed its operational state. #SUMMARY Port Index %d changed state to %d. Port Name: %s and SSN is #%s.
PAGE 145
To get details on any event, see the HP StorageWorks Fabric OS 5.x diagnostics and system error messages reference guide. swFabricWatchTrap Trap # 5 OID 1.3.6.1.4.1.1588.2.1.1.1.0.5 Enterprise sw Variables swFwClassAreaIndex, swFwThresholdIndex, swFwName, swFwLabel, swFwLastEvent, swFwLastEventVal, swFwLastEventTime, swFwLastState, swSsn Description Trap to be sent by Fabric Watch to notify of an event. Note #TYPE Fabric Watch has generated an event.
PAGE 146
Note Some of the triggers that generate this trap: • Logout • Unsuccessful login • Successful login • Switch configuration changes • Track changes on and off Sample trap output for Fabric OS 4.4.0: swTrackChangesInfo.0 = Logout swSsn.0 = none This trap gets sent when track-changes is set to ENABLED and is configured to send SNMP traps on track events. Use the trackchangesset command to enable the track changes feature and SNMP trap mode.
PAGE 147
ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year Example: Thu Aug 17 15:16:09 2000 swFWLastUpdated OID 1.3.6.1.4.1.1588.2.1.1.1.1.3 Description The date and time when the firmware was last loaded to the switch. Note The return string is displayed with the following format: ddd MMM DD hh:mm:ss yyyy where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year Example: Thu Aug 17 15:16:09 2000 swFlashLastUpdated OID 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 148
swBootPromLastUpdated OID 1.3.6.1.4.1.1588.2.1.1.1.1.5 Description The date and time when the BootPROM was last updated. Note The return string is displayed with the following format: ddd MMM DD hh:mm:ss yyyy where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year Example: Thu Aug 17 15:16:09 2000 swFirmwareVersion OID 1.3.6.1.4.1.1588.2.1.1.1.1.6 Description The current version of the firmware. Note The return value is displayed using the following format: vM.m.
PAGE 149
swAdmStatus OID 1.3.6.1.4.1.1588.2.1.1.1.1.8 Description The desired administrative status of the switch. A management station might place the switch in a desired state by setting this object accordingly. Possible values are: • online (1): Set the switch to be accessible by an external FC port. • offline (2): Set the switch to be inaccessible. • testing (3): Set the switch to run the built-in test. • faulty (4): Set the switch to a soft faulty condition.
PAGE 150
Method 1 Set swFlashDLHost.0, swFlashDLUser.0, and swFlashDLFile.0 to appropriate host IP address in dot notation (for example, 192.168.1.7), user name (for example, administrator), and file name of the firmware or configuration file (for example, /home/fcswh/v4.4), respectively. Method 2 1. Set swFlashDLPassword.0 to an appropriate value (for example, secret) if FTP is the desired method of transfer. 2. Set swFlashDLAdmStatus.0 to 3 (swCfUpload) or 4 (swCfDownload), accordingly.
PAGE 151
swFlashDLFile OID 1.3.6.1.4.1.1588.2.1.1.1.1.15 Description The name of the file to be downloaded or uploaded. swFlashDLPassword OID 1.3.6.1.4.1.1588.2.1.1.1.1.16 Description The password to be used for FTP transfer of files in the download or upload operation. swBeaconOperStatus OID 1.3.6.1.4.1.1588.2.1.1.1.1.18 Description The current operational status of the switch beacon.
PAGE 152
Table 13 Sensors on the HP StorageWorks switches HP StorageWorks Platform Temperature Fans Power Supplies swNumSensors / connUnitNum Sensors 4/16 SAN Switch 2 sensors 3 fans 1 PS 6 SAN Switch 2/8-EL 3 sensors 2 absent 5 fans 1 absent 2 absent 13 Note: Shows absent entries. SAN Switch 2/8V 4 sensors 3 fans 1 PS 8 SAN Switch 2/16 3 sensors 2 absent 4 fans 2 absent 2 PS 13 Note: Shows absent entries.
PAGE 153
swSensorStatus OID 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 Description The current status of the sensor. Valid values for swSensorStatus: • unknown (1): The status of the sensor is unknown. • faulty (2): The status of the sensor is faulty. • below-min (3): The sensor value is below the minimal threshold. • nominal (4): The status of the sensor is nominal. • above-max (5): The sensor value is above the maximum threshold. • absent (6): The sensor is missing.
PAGE 154
swID Not supported in Fabric OS 3.2.0. OID 1.3.6.1.4.1.1588.2.1.1.1.1.24 Description The number of the logical switch (either 0 or 1). swEtherIPAddress Not supported in Fabric OS 3.2.0. OID 1.3.6.1.4.1.1588.2.1.1.1.1.25 Description The IP address of the Ethernet interface of this logical switch. swEtherIPMask Not supported in Fabric OS 3.2.0. OID 1.3.6.1.4.1.1588.2.1.1.1.1.26 Description The IP mask of the Ethernet interface of this logical switch. swFCIPAddress Not supported in Fabric OS 3.2.0.
PAGE 155
swNbTable OID 1.3.6.1.4.1.1588.2.1.1.1.2.9 Description This table contains the ISLs in the immediate neighborhood of the switch. swNbEntry OID 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 Description An entry containing the ISL parameters for each neighbor. Index swNbIndex swNbIndex OID 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 Description The index for neighborhood entry. swNbMyPort OID 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.2 Description The port that has an ISL to another switch.
PAGE 156
swNbBaudRate OID 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5 Description The baud rate of the ISL. Possible values are: • other (1): None of the following • oneEighth (2):155 Mbaud • quarter (4): 266 Mbaud • half (8): 532 Mbaud • full (16): 1 Gbaud • double (32): 2 Gbaud • quadruple (64): 4 Gbaud Note The valid values for the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director switch are 16 (full) and 32 (double). The valid value for the SAN Switch 4/32 is 64 (quadruple). swNbIslState OID 1.3.6.1.4.1.
PAGE 157
swFabricMemDid OID 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.2 Description This object identifies the domain ID of the member switch. swFabricMemName OID 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.3 Description This object identifies the name of the member switch. swFabricMemEIP OID 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.4 Description This object identifies the Ethernet IP address of the member switch. swFabricMemFCIP OID 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.
PAGE 158
SW agent configuration group swAgtCmtyTable OID 1.3.6.1.4.1.1588.2.1.1.1.4.11 Description A table that contains the access control and parameters of the community, one entry for each community. Note The table displays all of the community strings (read and write) if it is accessed by the write community string. Only read community strings are displayed if it is accessed by the read community string. In Secure Fabric OS, the community strings can be modified only on the primary switch.
PAGE 159
Any or all of the trap recipients can be configured to send a trap for the associated community string. The maximum number of trap recipients that can be configured is six. If no trap recipient is configured, no traps are sent. The trap recipient IP address should be part of the Access Control List for Fabric OS 2.6.1, 3.1, and 4.x (see the agtCfgSet command). swAgtTrapSeverityLevel OID 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 Description The trap severity level associated with swAgtTrapRcp.
PAGE 160
swFCPortIndex OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 Description The switch port index. Note The physical port number of the switch, plus 1. The valid values for the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director are 0 through maximum number of ports. swFCPortType OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 Description The type of ASIC for the switch port.
PAGE 161
swFCPortAdmStatus OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 Description The desired state of the port. A management station might place the port in a desired state by setting this object accordingly. Possible values are: • Online (1): User frames can be passed. • Offline (2): No user frames can be passed. • Testing (3): No user frames can be passed. • Faulty (4): No user frames can be passed. Note For Fabric OS 3.x: The 3 (testing) state indicates that no user frames can be passed.
PAGE 162
swFCPortTxFrames OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 Description Counts the number of Fibre Channel frames that the port has transmitted. swFCPortRxFrames OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 Description Counts the number of Fibre Channel frames that the port has received. swFCPortRxC2Frames OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 Description Counts the number of Class 2 frames that the port has received. swFCPortRxC3Frames OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
PAGE 163
swFCPortRxTruncs OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 Description Counts the number of truncated frames that the port has received. swFCPortRxTooLongs OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 Description Counts the number of received frames that are too long. swFCPortRxBadEofs OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 Description Counts the number of received frames that have bad EOF delimiters. swFCPortRxEncOutFrs OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
PAGE 164
swFCPortLipOuts OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 Description Counts the number of loop initializations that have been initiated by the port. swFCPortLipLastAlpa OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 Description Indicates the arbitrated-loop physical address (AL_PA) of the loop device that initiated the last loop initialization. swFCPortWwn OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 Description The WWN of the Fibre Channel port.
PAGE 165
Name server database group swNsLocalNumEntry OID 1.3.6.1.4.1.1588.2.1.1.1.7.1 Description The number of local Name Server entries. swNsLocalTable OID 1.3.6.1.4.1.1588.2.1.1.1.7.2 Description The table of local Name Server entries. swNsLocalEntry OID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 Description An entry from the local Name Server database. Index swNsEntryIndex swNsEntryIndex OID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 Description The index of the Name Server database entry. swNsPortID OID 1.3.6.1.
PAGE 166
swNsNodeName OID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 Description The Fibre Channel WWN of the associated node, as defined in FC-GS-2. swNsNodeSymb OID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7 Description The contents of a Symbolic Name of the node associated with the entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 256 bytes, where the first byte of the array specifies the length of its contents.
PAGE 167
Event group Logically, the swEventTable is separate from the error log since it is essentially a view of the error log within a particular time window. swEventTrapLevel OID 1.3.6.1.4.1.1588.2.1.1.1.8.1 Description swAgtTrapSeverityLevel, in the absence of swEventTrapLevel, specifies the trap severity level of each defined trap recipient host. This object specifies the swEventTrap level in conjunction with an event’s severity level.
PAGE 168
swEventTimeInfo OID 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 Description The date and time that this event occurred. The return string is displayed using the following format: MMM DD hh:mm:ss where: MMM = Month DD = Date hh = Hour mm = Minute ss = Seconds Example: (HP Fabric OS 3.0 only) Aug 17 15:16:09 swEventLevel OID 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 Description The severity level of this event entry.
PAGE 169
• The other table, swFwThresholdTable, contains individual threshold information such as name, label, last event, and so forth. The thresholds are contained in SwFwThresholdEntry. swFwFabricWatchLicense OID 1.3.6.1.4.1.1588.2.1.1.1.10.1 Description If the license key is installed on the switch for Fabric Watch, the return value is swFwLicensed; otherwise, the value is swFwNotLicensed. swFwClassAreaTable OID 1.3.6.1.4.1.1588.2.1.1.1.10.2 Description The table of classes and areas.
PAGE 170
swFwDefaultTimebase OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 Description A default polling period for the Fabric Watch classArea combination. For example: • swFwTbMin = port (class), link loss (area). • swFwTbNone = environment (class), temperature (area). swFwDefaultLow OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 Description A default low threshold value. swFwDefaultHigh OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.6 Description A default high threshold value. swFwDefaultBufSize OID 1.3.6.1.4.1.1588.2.1.1.1.10.
PAGE 171
swFwCustBufSize OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 Description A customizable buffer size value for a Fabric Watch classArea combination. swFwThLevel OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 Description swFwThLevel is used to point to the current level for classArea values. It is either default or custom. Note For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
PAGE 172
swFwDefaultExceededActs OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 Description Default action matrix for an exceeded event. The exceeded value might be either above the high threshold or below the low threshold. swFwDefaultBelowActs OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 Description Default action matrix for a below event. swFwDefaultAboveActs OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18 Description Default action matrix for an above event. swFwDefaultInBetweenActs OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
PAGE 173
swFwValidActs OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25 Description Matrix of valid acts for a classArea. swFwActLevel OID 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.26 Description swFwActLevel is used to point to the current level for classArea values. It is either default or custom. Note For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
PAGE 174
swFwThresholdIndex OID 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Description Represents the element index of a threshold. Note For environment class, the indexes are from 2 through number of environment sensors+1. For example, the indexes for environment class temperature area are: • envTemp001: index of 2 • envTemp002: index of 3 • envTemp003: index of 4 • envTemp004: index of 5 • envTemp005: index of 6 For port-related classes such as E_Port, the indexes are from 1 through number of ports.
PAGE 175
Table 14 swFwName objects and object types (continued) swFwName objects (swFwName) Object types (threshold names) (continued) gbicTemp001 GBIC Temperature 1 gbicRXP001 GBIC RX power 1 gbicTXP001 GBIC TX power 1 gbicCrnt001 GBIC Current 1 eportCRCs007 E Port Invalid CRCs 7 eportLink007 E Port Link Failures 7 eportProtoErr007 E Port Protocol Errors 7 eportRXPerf007 E Port RX Performance 7 eportSignal007 E Port Loss of Signal 7 eportState007 E Port State Changes 7 eportSync007 E Port L
PAGE 176
Table 14 swFwName objects and object types (continued) swFwName objects (swFwName) Object types (threshold names) (continued) portTXPerf000 Port TX Performance 0 portWords000 Port Invalid Words 0 fopportCRCs013 FOP Port Invalid CRCs 13 fopportLink013 FOP Port Link Failures 13 fopportProtoErr0 FOP Port Protocol Errors 13 fopportRXPerf013 FOP Port RX Performance 13 fopportSignal013 FOP Port Loss of Signal 13 fopportState013 FOP Port State Changes 13 fopportSync013 FOP Port Loss of Sync 13
PAGE 177
swFwBehaviorType OID 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 Description A behavior wherein the thresholds generate an event. swFwBehaviorInt OID 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11 Description An integer by which the thresholds generate a continuous event. swFwLastSeverityLevel OID 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.12 Description A last event severity level of the threshold. Note This object obsoletes swEventTrapLevel. End device group This section discusses the swEndDevice MIBs.
PAGE 178
swEndDevicePortID OID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 Description The Fibre Channel port address ID of the entry. swEndDeviceLinkFailure OID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 Description Link failure count for the end device. swEndDeviceSyncLoss OID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 Description Sync loss count for the end device. swEndDeviceSigLoss OID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 Description Sig loss count for the end device. swEndDeviceProtoErr OID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.
PAGE 179
swGroupIndex OID 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1 Description The group index, starting from 1. swGroupName OID 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2 Description The name of the group. swGroupType OID 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.3 Description The type of the group. swGroupMemTable OID 1.3.6.1.4.1.1588.2.1.1.1.22.2 Description The table of members of all groups. This might not be available on all versions of the Fabric OS. swGroupMemEntry OID 1.3.6.1.4.1.1588.2.1.1.1.22.2.
PAGE 180
ASIC performance monitoring group This section discusses the swBlmPerfALPAMnt MIBs. swBlmPerfALPAMntTable OID 1.3.6.1.4.1.1588.2.1.1.1.23.1 Description AL_PA monitoring counter table. Note For the SAN Switch 4/32, 12 filter monitors per port are supported. swBlmPerfALPAMntEntry OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1 Description AL_PA monitoring counter for given AL_PA. Index swEndDevicePort, swEndDeviceAlpa swBlmPerfAlpaPort OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.
PAGE 181
swBlmPerfEEMntEntry OID 1.3.6.1.4.1.1588.2.1.1.1.23.2.1 Description End-to-end monitoring counter for given port. Index swBlmPerfEEPort, swBlmPerfEERefKey swBlmPerfEEPort OID 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 Description This object identifies the port number of the switch. swBlmPerfEERefKey OID 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 Description This object identifies the reference number of the counter. This reference is a number assigned when a filter is created.
PAGE 182
swBlmPerfFltMntEntry OID 1.3.6.1.4.1.1588.2.1.1.1.23.3.1 Description Filter-based monitoring counter for given port. Index swBlmPerfFltPort, swBlmPerfFltRefkey swBlmPerfFltPort OID 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 Description Identifies the port number of the switch. swBlmPerfFltRefkey OID 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2 Description Identifies the reference number of the filter. This reference number is assigned when a filter is created.
PAGE 183
swTrunkEntry OID 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 Description Entry for the trunking table. Index swTrunkPortIndex swTrunkPortIndex OID 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 Description This object identifies the switch port index. Note The value of a port index is 1 higher than the port number labeled on the front panel. For example, port index 1 corresponds to port number 0. swTrunkGroupNumber OID 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.
PAGE 184
swTrunkGrpMaster OID 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2 Description This object gives the master port ID for the trunk group. swTrunkGrpTx OID 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 Description Gives the aggregate value of the transmitted words from this trunk group. Note The syntax for this MIB variable is an octet string. The output is shown in hexadecimal value. The value of swTrunkGrpTx is the 4-byte word transmitted in the TrunkGrp port.
PAGE 185
6 High-availability MIB objects This chapter provides descriptions and other information specific to HA-MIB object types and includes the following sections: • HA-MIB overview next • HA group, page 187 • HA-MIB traps, page 191 • HA-MIB traps and sample triggers, page 193 HA-MIB overview The HA-MIB provides information about the HA features of Fabric OS 4.x. This MIB is supported only in Fabric OS 4.1.0 and later (and is not supported in Fabric OS 3.x or Fabric OS 2.6.x). The HA-MIB depends on the SW-MIB.
PAGE 186
- haMIB (1.3.6.1.4.1.1588.2.1.
PAGE 187
HA group This section describes the MIB objects in the HA group. haStatus OID 1.3.6.1.4.1.1588.2.1.2.1.1 Description Indicates whether the system is redundant. Possible values are: • Redundant (0) • Nonredundant (1) Note Redundant = Dual CP with standby CP ready to take over. Non-redundant = Single/Dual CP system with standby CP not available to take over. FRU table fruTable OID 1.3.6.1.4.1.1588.2.1.2.1.5 Description This table inventories the FRU slots available.
PAGE 188
fruClass OID 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 Description The type of the FRU object that this slot can hold. Possible values are: • other (1) • unknown (2) • chassis (3) • cp (4) • other-CP (5) • switchblade (6) • wwn (7) • powerSupply (8) • fan (9) fruStatus OID Description 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 The current status of the FRU object in the slot. Possible values are: • other (1) • unknown (2) • n (3) • off (4) • faulty (5) fruObjectNum OID Description 1.3.6.1.4.1.1588.2.1.2.1.5.1.
PAGE 189
FRU history table fruHistoryTable OID 1.3.6.1.4.1.1588.2.1.2.1.6 Description This table gives the contents of the entire history log of the FRU events. fruHistoryEntry OID 1.3.6.1.4.1.1588.2.1.2.1.6.1 Description An entry in this table represents a particular FRU event. Index fruHistoryIndex fruHistoryIndex OID 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 Description Index of the FRU event in the history table. fruHistoryClass OID 1.3.6.1.4.1.1588.2.1.2.1.6.1.
PAGE 190
fruHistoryTime OID 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 Description The time at which this event happened. fruHistoryPartNum OID 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 Description The HP part number of the FRU object. fruHistorySerialNum OID 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 Description The HP serial number of the FRU object. Control processor (CP) table cpTable OID 1.3.6.1.4.1.1588.2.1.2.1.7 Description This table lists all the CPs in the system. OID 1.3.6.1.4.1.1588.2.1.2.1.7.
PAGE 191
cpIpGateway OID 1.3.6.1.4.1.1588.2.1.2.1.7.1.4 Description The IP address of the IP gateway for this CP. cpLastEvent OID 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 Description The last event related to this CP: • haSync (1) • haOutSync (2) • cpFaulty (3) • cpHealthy (4) • configChange (5) • failOverStart (6) • failOverDone (7) • firmwareCommit (8) • firmwareUpgrade (9) • other (10) • unknown (11) Note haSync = HA state on both is in sync; haOutSync = HA state on both is out of sync.
PAGE 192
cpStatusChanged OID 1.3.6.1.4.1.1588.2.1.2.2.0.2 Objects cpStatus cpLastEvent swID swSsn Status Current Description This trap is sent when the status of any CP object changes. Note The cpLastEvent variable provides the information about the event that occurred. Some of the triggers that will generate this trap are: • Reboot • firmwareDownload Sample trap output for Fabric OS 4.4.0: cpStatus.13 = standby(4) cpLastEvent.13 = cpHealthy(6) swID.0 = 1 swSsn.
PAGE 193
HA-MIB traps and sample triggers Table 17 lists the HA-MIB traps and sample events that will trigger them. Table 17 HA-MIB traps and examples of triggers HA-MIB traps Trigger fruStatusChanged Examples of events that will trigger this trap: • • cpStatusChanged Switch reboot Add or remove a FRU component Examples of events that will trigger this trap: • Reboot • firmwareDownload fruHistoryTrap Examples of events that will trigger this trap: • Add or remove a FRU component Fabric OS 5.
PAGE 194
High-availability MIB objects
PAGE 195
7 FICON MIB objects NOTE: FICON is not supported on HP B-Series Fibre Channel switches. The FICON information in this document is included for reference only.
PAGE 196
- iso (1) - org (3) - dod (6) - internet (1) - private (4) - enterprises (1) - bsci (1588) - commDev (2) - fibreChannel (1) - fcSwitch (1) - linkIncidentMIB (50) - ficonRNID (2) - ficonLIRR(3) - ficonRLIR (4) - linkIncidentMIBTraps (21) Figure 52 Overall tree structure for FICON MIB (linkIncidentMIB) 196 FICON MIB objects
PAGE 197
- linkIncidentMIB (1.3.6.1.4.1.1588.2.1.1.
PAGE 198
Definitions for FICON MIB Table 18 lists the objects and definitions that are imported into the FICON MIB and the modules from which they are imported. Table 18 Objects and imported into the FICON MIB Object/definition Module imported from MODULE-IDENTITY SNMPv2-SMI OBJECT-TYPE Integer32 NOTIFICATION-TYPE TEXTUAL-CONVENTION SNMPv2-TC DisplayString fcSwitch HP-REG-MIB Textual conventions Table 19 lists the text conventions for the FICON MIB.
PAGE 199
FICON MIB text conventions (continued) Table 19 Name Status Description Syntax RegType Current Represents the RNID Registration Type. INTEGER { conditional (1), unconditional (2) } RNIDSequenceNumber Current Sequence number of the self describing node. OCTET STRING (SIZE (12)) RNIDManufacturerPlant Current Represents the manufacturer’s plant name or code. OCTET STRING (SIZE (2)) RNIDParams Current Represents the value of Param.
PAGE 200
nodeRNIDEntry OID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 Description An entry containing the RNID information for a FICON node (see Table 20).
PAGE 201
nodeRNIDType OID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.5 Description Number associated with a node. nodeRNIDModel OID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6 Description Model number of the RNID node. nodeRNIDManufacturer OID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.7 Description The manufacturer of the node. nodeRNIDManufacturerPlant OID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.8 Description The manufacturer plant of the node. nodeRNIDSequenceNumber OID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.
PAGE 202
nodeRNIDParams OID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.14 Description Node parameters of the connected port. switchRNIDTableNumEntries OID 1.3.6.1.4.1.1588.2.1.1.50.2.3 Description The number of entries in an RNID table that corresponds to the switch. Note See the ficonShow command help page for additional information on FICON MIB tables. switchRNIDTable OID 1.3.6.1.4.1.1588.2.1.1.50.2.4 Description A table that contains RNID information for each switch FICON node. switchRNIDEntry OID 1.3.6.1.4.
PAGE 203
switchRNIDType OID 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.4 Description Type Number associated with the switch. switchRNIDModel OID 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.5 Description Model number of the RNID switch. switchRNIDManufacturer OID 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.6 Description The manufacturer of the switch. switchRNIDManufacturerPlant OID 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.7 Description The manufacturer plant of the switch. switchRNIDSequenceNumber OID 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.
PAGE 204
LIRRTable OID 1.3.6.1.4.1.1588.2.1.1.50.3.2 Description A table that contains LIRR information, one entry for each LIRR incident for an attached FICON device. LIRREntry OID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1 Description An entry containing LIRR information (see Table 22).
PAGE 205
LIRRPortType OID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 Description Attached port type. LIRRFormat OID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 Description Registration type: conditional or unconditional. ficonRLIR group This group contains all RLIR group objects for FICON. rLIRTableNumEntries OID 1.3.6.1.4.1.1588.2.1.1.50.4.1 Description The number of entries in a switch RLIR table. Note See the ficonShow command help page for additional information on FICON MIB tables. rLIRTable OID 1.3.6.1.4.1.1588.
PAGE 206
rLIRIndex OID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 Description Index into the RLIR table. rLIRIncidentPortWwn OID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.2 Description Port WWN for RLIR Incident port. rLIRIncidentNodeWwn OID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.3 Description Incident node WWN. rLIRIncidentPortType OID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 Description RLIR Incident port type. rLIRIncidentPID OID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 Description RLIR Incident PID. rLIRIncidentPortNumber OID 1.3.
PAGE 207
rLIRTimeStamp OID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12 Description RLIR time stamp. rLIRFormat OID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13 Description RLIR Format. linkIncidentMIBTraps group linkIncidentMIBTrapPrefix OID 1.3.6.1.4.1.1588.2.1.1.50.21.0 Description The Link Incident traps. linkRNIDDeviceRegistration Trap# 1 OID 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 Enterprise sw Variables nodeRNIDIndex, nodeRNIDIncidentPortWWN, nodeRNIDConnectedPortWWN Description A device registered with the switch.
PAGE 208
linkLIRRListenerRemoved Trap# 4 OID 1.3.6.1.4.1.1588.2.1.1.50.21.0.4 Enterprise sw Variables LIRRListenerPortWWN, LIRRListenerPID, LIRRIndex Description A listener for link failure incident has been removed. linkRLIRFailureIncident Trap# 5 OID 1.3.6.1.4.1.1588.2.1.1.50.21.0.5 Enterprise sw Variables nodeRNIDIndex, LIRRIndex, rLIRIncidentPortWwn, rLIRConnectedPortWwn, , rLIRLinkFailureType, LIRRListenerPID Description A link failure incident has occurred.
PAGE 209
8 FibreAlliance MIB objects This chapter contains descriptions and other information specific to FA MIB (FCMGMT-MIB) object types, including the following: • FA MIB overview next • ConnSet group, page 216 • Statistics group, page 241 • Service group, page 250 • SNMP trap registration group, page 252 • Revision number scalar, page 254 • Unsupported tables, page 254 • Unsupported traps, page 255 FA MIB overview The descriptions of each of the MIB variables in this chapter come directly from the FCMGMT-MIB i
PAGE 210
- iso (1) - org (3) - dod (6) - internet (1) - experimental (3) - fcmgmt (94) - connSet (1) - uNumber (1) - systemURL (2) - StatusChangeTime (3) - ConfigurationChangeTime (4) - ConnUnitTableChangeTime(5) + connUnitTable (6) + connUnitRevsTable (7) + connUnitSensorTable (8) + connUnitPortTable (10) + connUnitEventTable (11) + connUnitLinkTable (12) - trapReg (2) - trapMaxClients (1) - trapClientCount (2) + trapRegTable (3) - revisionNumber (3) - statSet (4) + connUnitPortStatTable (1) - connUnitServiceSet (5
PAGE 211
- connUnitRevsTable (7) - connUnitRevsEntry (1) - connUnitRevsUnitId (1) - connUnitRevsIndex (2) - connUnitRevsRevId (3) - connUnitRevsDescription (4) Figure 57 ConnUnitRevs table hierarchy Fabric OS 5.
PAGE 212
- connUnitSensorTable (8) - connUnitSensorEntry (1) - connUnitSensorUnitId (1) - connUnitSensorIndex (2) - connUnitSensorName (3) - connUnitSensorStatus (4) - connUnitSensorInfo (5) - connUnitSensorMessage (6) - connUnitSensorType (7) - (8) Figure 58 ConnUnitSensorTable hierarchy - connUnitPortTable (10) - connUnitPortEntry (1) - connUnitPortUnitId (1) - connUnitPortIndex (2) - connUnitPortType (3) - connUnitPortFCClassCap (4) - connUnitPortFCClassOp (5) - connUnitPortState (6) - connUnitPortStatus (7) -
PAGE 213
- connUnitLinkTable (12) - connUnitLinkEntry (1) - connUnitLinkUnitId (1) - connUnitLinkIndex (2) - connUnitLinkNodeIdX (3) - connUnitLinkPortNumberX (4) - connUnitLinkPortWwnX (5) - connUnitLinkNodeIdY (6) - connUnitLinkPortNumberY (7) - connUnitLinkPortWwnY (8) - connUnitLinkAgentAddressY (9) - connUnitLinkAgentAddressTypeY (10) - connUnitLinkAgentPortY (11) - connUnitLinkUnitTypeY (12) - (13) - connUnitLinkCurrIndex (14) Figure 61 ConnUnitLinkTable hierarchy - trapRegTable (8) - trapRegEntry (1) - trap
PAGE 214
- connUnitPortStatTable (5) - connUnitPortStatEntry (1) - connUnitPortStatUnitId (1) - connUnitPortStatIndex (2) - connUnitPortStatCountError (3) - connUnitPortStatCountTxObjects (4) - connUnitPortStatCountRxObjects (5) - connUnitPortStatCountTxElements (6) - connUnitPortStatCountRxElements (7) - connUnitPortStatCountBBCreditZero (8) - connUnitPortStatCountInputBuffersFull (9) - connUnitPortStatCountFBSYFrames (10) - connUnitPortStatCountPBSYFrames (11) - connUnitPortStatCountFRJTFrames (12) - connUnitPortS
PAGE 215
- connUnitServiceSet(5) - connUnitServiceTables (2) - connUnitSnsTable (1) - connUnitSnsEntry (1) - connUnitSnsId (1) - connUnitSnsPortIndex (2) - connUnitSnsPortIdentifier (3) - connUnitSnsPortName (4) - connUnitSnsNodeName (5) - connUnitSnsClassOfSvc (6) - connUnitSnsNodeIPAddress (7) - connUnitSnsProcAssoc (8) - connUnitSnsFC4Type (9) - connUnitSnsPortType (10) - connUnitSnsPortIPAddress (11) - connUnitSnsFabricPortName (12) - connUnitSnsHardAddress (13) - connUnitSnsSymbolicPortName (14) - connUnitSnsSy
PAGE 216
Definitions for FCMGMT-MIB (continued) Table 24 Type definition Value Description FcUnitType Integer • • • • • • • • • • • • • • 1 (unknown) 2 (other) None of 3–14. 3 (hub) Passive connectivity unit supporting loop protocol 4 (switch) Active connectivity unit supporting multiple protocols 5 (gateway) Unit that not only converts the interface but also encapsulates the frame into another protocol. The assumption is that there are always two gateways connected together: for example, FC <-> ATM.
PAGE 217
Connectivity unit table connUnitTable OID 1.3.6.1.3.94.1.6 Description A list of units under a single SNMP agent. The number of entries is given by the value of uNumber. The value is 1 for stand-alone system. connUnitEntry OID 1.3.6.1.3.94.1.6.1 Description A connectivity unit entry containing objects for a particular unit. Index connUnitId connUnitId OID 1.3.6.1.3.94.1.6.1.1 Description The unique identification for this connectivity unit among those within this proxy domain.
PAGE 218
connUnitGlobalId OID 1.3.6.1.3.94.1.6.1.2 Description An optional global-scope identifier for this connectivity unit. It must be a WWN for this connectivity unit or 16 octets of value 0. The following characteristics are required: • WWN formats requiring fewer than 16 octets must be extended to 16 octets with trailing 0 octets. • If a WWN is used for connUnitId, the same WWN must be used for connUnitGlobalId.
PAGE 219
connUnitType OID 1.3.6.1.3.94.1.6.1.3 Description The type of this connectivity unit. Note Set to 4 (switch). connUnitNumports OID 1.3.6.1.3.94.1.6.1.4 Description Number of physical ports (between 0 and the maximum number of system supported ports) in the connectivity unit (internal/embedded, external). Note To determine the maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity. HP StorageWorks switches support 0 to maximum number of system supported ports.
PAGE 220
connUnitStatus OID 1.3.6.1.3.94.1.6.1.6 Description Overall status of the connectivity unit: • Unknown (1) • Unused (2) • OK (3) • Warning (4): Needs attention. • Failed (5) Note switchStatus maps directly as follows: • connUnitStatusswitchStatus • 1 (unknown): Unknown • 2 (unused): Unmonitored • 3 (ok): Healthy/ok • 4 (warning): Marginal/Warning • 5 (failed): Down/Failed connUnitProduct OID 1.3.6.1.3.94.1.6.1.7 Description The connectivity unit vendor's product model name.
PAGE 221
connUnitDomainId OID 1.3.6.1.3.94.1.6.1.11 Description 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if required. If this value is not applicable, return all bits to 1. Note Set to the switch domain ID (as per FC-SW). connUnitProxyMaster OID 1.3.6.1.3.94.1.6.1.12 Description A value of yes means this is the proxy master unit for a set of managed units.
PAGE 222
connUnitConfigurationChangeTime OID 1.3.6.1.3.94.1.6.1.16 Description The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for any members of the set. In other words, this is the latest time stamp of flash memory update. This represents a union of change information for connUnitConfigurationChangeTime Note Not supported. connUnitNumRevs OID 1.3.6.1.3.94.1.6.1.17 Description The number of revisions in connUnitRevsTable. Note Set to 2. connUnitNumZones OID 1.
PAGE 223
connUnitControl OID 1.3.6.1.3.94.1.6.1.22 Description Controls the addressed connUnit. Each implementation might choose not to allow any or all of these values on a SET. Possible values are: • unknown (1) • invalid (2) • resetConnUnitColdStart (3): Reboot. Performs a switch reboot. • resetConnUnitWarmStart (4): Fastboot. The addressed unit performs a Warm Start reset. • offlineConnUnit (5): Disable switch. The addressed unit puts itself into an implementation-dependant offline state.
PAGE 224
connUnitNumEvents OID 1.3.6.1.3.94.1.6.1.26 Description Number of events currently in connUnitEventTable. Note For Fabric OS 3.0 this value ranges from 0 to 64. For Fabric OS 4.0 this value ranges from 0 to 255. For Fabric OS 4.2 this value ranges from 0 to 2048. For Fabric OS 4.4 this value ranges from 0 to 1024. For Fabric OS 5.x this value ranges from 0 to 1024. connUnitMaxEvents OID 1.3.6.1.3.94.1.6.1.27 Description Maximum number of events that can be defined in connUnitEventTable.
PAGE 225
connUnitRevsIndex OID 1.3.6.1.3.94.1.7.1.2 Description A unique value among all connUnitRevsEntrys with the same value of connUnitRevsUnitId, in the range between 1 and connUnitNumRevs. Note Index 1 returns the hardware version. Index 2 returns the software version. connUnitRevsRevId OID 1.3.6.1.3.94.1.7.1.3 Description A vendor-specific string identifying a revision of a component of the connUnit indexed by connUnitRevsUnitId. Note Index 1 returns the switchType from switchShow.
PAGE 226
connUnitSensorName OID 1.3.6.1.3.94.1.8.1.3 Description A textual identification of the sensor, intended primarily for operator use. Note Each identification contains the name of sensor in textual format: for example, Temp #1, Fan #2, and so forth. connUnitSensorStatus OID 1.3.6.1.3.94.1.8.1.4 Description The status indicated by the sensor: • unknown (1) • other (2) • ok (3) • warning (4) • failed (5) Note Nominal = 3 (ok). Not nominal = 5 (failed). connUnitSensorInfo OID 1.3.6.1.3.94.1.8.1.
PAGE 227
Note The following mapping is for each individual sensor, where applicable: swSensorType connUnitSensorType 1 (temperature) 8 (board) 2 (fan) 4 (fan) 3 (power supply) 5 (power supply) connUnitSensorCharacteristic OID 1.3.6.1.3.94.1.8.1.8 Description The characteristics being monitored by this sensor. Possible values are: • unknown (1) • other (2) • temperature (3) • pressure (4) • emf (5) • currentValue (6): (Note that current is a keyword.
PAGE 228
connUnitPortUnitId OID 1.3.6.1.3.94.1.10.1.1 Description The connUnitId value of the connectivity unit that contains this port. Note Same value as connUnitId. connUnitPortIndex OID 1.3.6.1.3.94.1.10.1.2 Description Number of physical ports between 0 and maximum number of system supported ports in the connectivity unit (internal/embedded, external). Note To determine the maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity.
PAGE 229
Note Mapped as: • U_Port = 10 (g-port) • F_Port = 8 (f-port) • FL_Port = 7 (fl-port) • E_Port = 9 (e-port) connUnitPortFCClassCap OID 1.3.6.1.3.94.1.10.1.4 Description Bit mask that specifies the Classes of Service capability of this port. If this is not applicable, return all bits set to 0. The bits have the following definition: • unknown0 • class-f1 • class-one2 • class-two4 • class-three8 • class-four16 • class-five32 • class-six64 Note For an F_Port or FL_Port, this value is 0x000C.
PAGE 230
connUnitPortStatus OID 1.3.6.1.3.94.1.10.1.7 Description An overall protocol status for the port: • unknown (1) • unused (2): Device cannot report this status. • ready (3):FCAL Loop or FCPH Link reset protocol initialization has completed. • warning (4): Do not use. • failure (5): Do not use. • notparticipating (6): Loop is not participating and does not have a loop address. • initializing (7): Protocol is proceeding. • bypass (8): Do not use. • ols (9): FCP offline status. (Not supported in Fabric OS 2.
PAGE 231
Note For an external FC_Port with GBIC, this value is set to 6 (gbicSerialId) or 7 (gbicNoSerialId). For an external FC_Port without GBIC, this value is set to 8 (gbicNotInstalled). connUnitPortWwn OID 1.3.6.1.3.94.1.10.1.10 Description The WWN of the port, if applicable; otherwise, an empty string. This is in IEEE Extended format, and the extension contains the internal port number of each port. Note The internal port number is 1 less than the port index.
PAGE 232
connUnitPortSpeed OID 1.3.6.1.3.94.1.10.1.15 Description The speed of the port, in kilobytes per second (KBps). Note For example, the valid values for the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director: 125,000 KBps, 250,000 KBps, or 500,000 KBps, depending on the configuration. connUnitPortControl OID 1.3.6.1.3.94.1.10.1.16 Description Controls the addressed connUnit’s port.
PAGE 233
• Addition of the port from an arbitrated loop by a hub. Each implementation might choose not to allow any or all of these values on a SET. If the management station uses in-band communication (FC-IP) with the switch, either of the two following actions might result in a loss of in-band communication with the switch: • Disabling the FC port that is connected to the management station. • Disabling the embedded port.
PAGE 234
connUnitPortStatObject OID 1.3.6.1.3.94.1.10.1.19 Description This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information helps identify the statistics objects found in the table. From this point, use the getnext command to get the next statistics object. When the first part of the OID changes, the end of table has been reached.
PAGE 235
connUnitPortNodeWwn Not supported in Fabric OS 2.6.1. OID 1.3.6.1.3.94.1.10.1.22 Description The node WWN of the port, if applicable; otherwise, an empty string. All related ports within a group should have the same node WWN value. The container is defined as the largest physical entity. For example: • All ports on HBAs on a host will have the same node WWN. All ports on the same storage subsystem will have the same node WWN.
PAGE 236
connUnitEventEntry OID 1.3.6.1.3.94.1.11.1 Description Each entry contains information on a specific event for the given connectivity unit. Index connUnitEventUnitId connUnitEventIndex connUnitEventUnitId OID 1.3.6.1.3.94.1.11.1.1 Description The connUnitId of the connectivity unit that contains this event table. Note Same as connUnitId. connUnitEventIndex OID 1.3.6.1.3.94.1.11.1.2 Description Each connectivity unit has its own event buffer. As it wraps, it might write over previous events.
PAGE 237
connUnitREventTime OID 1.3.6.1.3.94.1.11.1.4 Description The real time when the event occurred. It has the following format. DDMMYYYY HHMMSS where: DD = day number MM = month number YYYY = year HH = hours MM = minutes SS = seconds If not applicable, returns a null string. connUnitSEventTime OID 1.3.6.1.3.94.1.11.1.5 Description The sysuptime time stamp when the event occurred. connUnitEventSeverity OID 1.3.6.1.3.94.1.11.1.6 Description The event severity level.
PAGE 238
connUnitEventDescr OID 1.3.6.1.3.94.1.11.1.9 Description The description of the event. Note Same as the string displayed in the system error log. The system error log can be viewed using the errShow or errDump commands. Note For Fabric OS 4.4.0, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text. Previously, this field used the task ID and all of the message number and message text.
PAGE 239
connUnitLinkEntry OID 1.3.6.1.3.94.1.12.1 Description An entry describing a particular link to another. Index connUnitLinkUnitId connUnitLinkIndex connUnitLinkUnitId OID 1.3.6.1.3.94.1.12.1.1 Description The connUnitId of the connectivity unit that contains this link table. Note Set to WWN of the local switch. connUnitLinkIndex OID 1.3.6.1.3.94.1.12.1.2 Description This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId.
PAGE 240
connUnitLinkNodeIdY OID 1.3.6.1.3.94.1.12.1.6 Description The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is a connUnit in the responding SNMP agency, then the value of this object must be equal to its connUnitID. Note ISL: WWN of the remote switch. Device: Node name of the device. connUnitLinkPortNumberY OID 1.3.6.1.3.94.1.12.1.7 Description The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, –1.
PAGE 241
connUnitLinkUnitTypeY OID 1.3.6.1.3.94.1.12.1.12 Description Type of the FC connectivity unit, as defined in connUnitType. • ISL: Switch device. • End devices: End device types based on an FCP Inquiry (See Table 25). HP does not support Hubs.
PAGE 242
connUnitPortStatEntry OID 1.3.6.1.3.94.4.5.1 Description An entry describing port statistics. Index connUnitPortStatUnitId connUnitPortStatIndex connUnitPortStatUnitId OID 1.3.6.1.3.94.4.5.1.1 Description The connUnitId of the connectivity unit that contains this port statistics table. connUnitPortStatIndex OID 1.3.6.1.3.94.4.5.1.2 Description A unique value among all entries in this table, between 0 and connUnitNumPort[connUnitPortUnitId]. connUnitPortStatCountError OID 1.3.6.1.3.94.4.5.1.
PAGE 243
connUnitPortStatCountRxElements OID 1.3.6.1.3.94.4.5.1.7 Description The number of octets or bytes that have been received by this port. There is a one-second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. Note For Fibre Channel, ordered sets are not included in the count. connUnitPortStatCountBBCreditZero OID 1.3.6.1.3.94.4.5.1.8 Description The number of transitions in/out of BB credit zero state.
PAGE 244
connUnitPortStatCountFRJTFrames OID 1.3.6.1.3.94.4.5.1.12 Description The number of times that FRJT was returned to this port as a result of a frame that was rejected by the fabric. Note This is the total for all classes and is a Fibre Channel statistic only. connUnitPortStatCountPRJTFrames Not supported. OID 1.3.6.1.3.94.4.5.1.13 Description The number of times that FRJT was returned to this port as a result of a frame that was rejected at the destination N_Port.
PAGE 245
connUnitPortStatCountClass1FRJTFrames OID 1.3.6.1.3.94.4.5.1.18 Description The number of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected by the fabric. Note This is a Fibre Channel statistic only. HP does not support Class 1 Frames. connUnitPortStatCountClass1PRJTFrames OID 1.3.6.1.3.94.4.5.1.19 Description The number of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected at the destination N_Port.
PAGE 246
connUnitPortStatCountClass2PBSYFrames Not supported. OID 1.3.6.1.3.94.4.5.1.23 Description The number of times that PBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can occur only on SOFc1 frames (the frames that establish a connection). Return value: 80 0 0 0 0 0 0 0 Note This is a Fibre Channel statistic only. connUnitPortStatCountClass2FRJTFrames Not supported.
PAGE 247
connUnitPortStatCountRxMulticastObjects OID 1.3.6.1.3.94.4.5.1.29 Description The number of multicast frames or packets received at this port. connUnitPortStatCountTxMulticastObjects OID 1.3.6.1.3.94.4.5.1.30 Description The number of multicast frames or packets transmitted out this port. connUnitPortStatCountRxBroadcastObjects OID 1.3.6.1.3.94.4.5.1.31 Description The number of broadcast frames or packets received at this port.
PAGE 248
connUnitPortStatCountRxOfflineSequences OID 1.3.6.1.3.94.4.5.1.36 Description The number of offline primitive OLS received at this port. Note This is a Fibre Channel statistic only. connUnitPortStatCountTxOfflineSequences OID 1.3.6.1.3.94.4.5.1.37 Description The number of offline primitive OLS transmitted by this port. Note This is a Fibre Channel statistic only. connUnitPortStatCountNumberOfflineSequences OID 1.3.6.1.3.94.4.5.1.
PAGE 249
connUnitPortStatCountLossofSignal OID 1.3.6.1.3.94.4.5.1.43 Description The number of instances of signal loss detected at this port. This count is part of the LESB. (FC-PH 29.8) Note This is a Fibre Channel statistic only. connUnitPortStatCountLossofSynchronization OID 1.3.6.1.3.94.4.5.1.44 Description The number of instances of synchronization loss detected at this port. This count is part of the LESB. (FC-PH 29.8) Note This is a Fibre Channel statistic only.
PAGE 250
connUnitPortStatCountDelimiterErrors OID 1.3.6.1.3.94.4.5.1.49 Description The number of invalid frame delimiters received at this port. An example is a frame with a class 2 start and a class 3 at the end. Note This is a Fibre Channel statistic only. connUnitPortStatCountEncodingDisparityErrors OID 1.3.6.1.3.94.4.5.1.50 Description The number of disparity errors received at this port. Note This is a Fibre Channel statistic only. Service group Not supported in Fabric OS 2.6.1.
PAGE 251
connUnitSnsPortIndex OID 1.3.6.1.3.94.5.2.1.1.2 Description The physical port number of this SNS table entry. Each physical port has an SNS table with 1-n entries indexed by connUnitSnsPortIdentifier (port address). connUnitSnsPortIdentifier OID 1.3.6.1.3.94.5.2.1.1.3 Description The port identifier for this entry in the SNS table. connUnitSnsPortName OID 1.3.6.1.3.94.5.2.1.1.4 Description The port name for this entry in the SNS table. connUnitSnsNodeName OID 1.3.6.1.3.94.5.2.1.1.
PAGE 252
connUnitSnsPortIPAddress OID 1.3.6.1.3.94.5.2.1.1.11 Description The IPv6 formatted address of this entry in the SNS table. connUnitSnsFabricPortName OID 1.3.6.1.3.94.5.2.1.1.12 Description The fabric port name of this entry in the SNS table. connUnitSnsHardAddress OID 1.3.6.1.3.94.5.2.1.1.13 Description The hard address of this entry in the SNS table. connUnitSnsSymbolicPortName OID 1.3.6.1.3.94.5.2.1.1.14 Description The symbolic port name of this entry in the SNS table.
PAGE 253
trapRegEntry OID 1.3.6.1.3.94.2.3.1 Description IP/port pair for a specific client. Index trapRegIpAddress trapRegPort trapRegIpAddress OID 1.3.6.1.3.94.2.3.1.1 Description The IP address of a client registered for traps. trapRegPort OID 1.3.6.1.3.94.2.3.1.2 Description The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table. Note Set to 162. trapRegFilter OID 1.3.6.1.3.94.
PAGE 254
Table 26 TrapRegRowState for read/write State Read description Write description rowDestroy (1) Read: Can never happen. Write: Remove this row from the table. rowInactive (2) Read: Indicates that this row does exist but that traps are not enabled to be sent to the target. Write: If the row does not exist and the agent allows writes to the trap table, then a new row is created. The values of the optional columns are set to default values. Traps are not enabled to be sent to the target.
PAGE 255
Unsupported traps connUnitStatusChange Enterprise fcmgmt Variables connUnitStatus, connUnitState Description The overall status of the connectivity unit has changed. Recommended severity level (for filtering): alert. Note Generated when connUnitStatus changes. See ”connUnitStatus” on page 220 to see how the value is calculated. Sample trap output for Fabric OS 4.4.0: connUnitStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.1 = warning(4) connUnitState.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.
PAGE 256
connUnitSensorStatusChange Enterprise fcmgmt Variables connUnitSensorStatus Description Overall status of the connectivity unit has changed. Note This trap is generated whenever the status of the sensors (like fan, power supply, temperature) present in the connectivity unit changes. Sample trap output for Fabric OS 4.4.0: connUnitSensorStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.7 = failed(5) See the HP StorageWorks Fabric OS 5.
PAGE 257
A MIB object groupings This appendix provides a function-based listing of MIB objects.
PAGE 258
Event variables MIB variables that assist in monitoring or modifying events are found in the following tables or groups: • Connectivity unit event table, page 235 • Event group, page 167 ISL and end device variables MIB variables that assist in monitoring or modifying ISL and end-devices are found in the following tables or groups: ISL variables • Connectivity unit link table, page 238 • swFabric group, page 154 End device variables • Connectivity unit link table, page 238 • Fx_Port fabric login table, p
PAGE 259
B MIB OIDs and their matching object names This appendix provides a listing of the 3.1.x MIB object names and the corresponding MIB Object ID (OID) associated with each. MIB OIDs The following matrix allows you to identify a MIB object name according to its related OID. Table 27 MIB object name and OID matrix MIB Object Name OID Page iso 1 68 org 1.3 68 dod 1.3.6 68 internet 1.3.6.1 68 directory 1.3.6.1.1 35 mgmt 1.3.6.1.2 68 mib-2 1.3.6.1.2.1 68 fcFeMIB 1.3.6.1.2.1.
PAGE 260
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 77 fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 77 fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11 77 fcFxPortClass2SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.12 77 fcFxPortClass3SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.13 78 fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14 78 fcFeStatus 1.3.6.1.2.1.75.1.2 69 fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 78 fcFxPortStatusEntry 1.3.6.
PAGE 261
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID Page fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4 83 fcFxPortInvalidTxWords 1.3.6.1.2.1.75.1.3.1.1.5 83 fcFxPortInvalidCrcs 1.3.6.1.2.1.75.1.3.1.1.6 83 fcFxPortDelimiterErrors 1.3.6.1.2.1.75.1.3.1.1.7 84 fcFxPortAddressIdErrors 1.3.6.1.2.1.75.1.3.1.1.8 84 fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9 84 fcFxPortLinkResetOuts 1.3.6.1.2.1.75.1.3.1.1.10 84 fcFxPortOlsIns 1.3.6.1.2.1.75.1.3.1.1.
PAGE 262
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 88 fcFxPortCapEntry 1.3.6.1.2.1.75.1.5.1.1 88 fcFxPortCapFcphVersionHigh 1.3.6.1.2.1.75.1.5.1.1.1 88 fcFxPortCapFcphVersionLow 1.3.6.1.2.1.75.1.5.1.1.2 88 fcFxPortCapBbCreditMax 1.3.6.1.2.1.75.1.5.1.1.3 88 fcFxPortCapBbCreditMin 1.3.6.1.2.1.75.1.5.1.1.4 88 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.2.1.75.1.5.1.1.5 89 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.2.1.75.1.5.1.1.
PAGE 263
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID Page fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 97 fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 97 fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 98 fcFeModuleFxPortCapacity 1.3.6.1.3.42.2.1.1.4.1.6 98 fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 98 fcFxConfTable 1.3.6.1.3.42.2.1.1.5 98 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 98 fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 98 fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.
PAGE 264
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.1 103 fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2 103 fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 103 fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 103 fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 103 fcFxPortPhysRttov 1.3.6.1.3.42.2.1.2.3.1.6 104 fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 104 fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.
PAGE 265
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID Page fcFeAcct 1.3.6.1.3.42.2.1.4 93 fcFeCap 1.3.6.1.3.42.2.1.5 93 fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 108 fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 108 fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 108 fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 109 fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 109 fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 109 fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.
PAGE 266
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 221 connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 221 connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 221 connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 222 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 222 connUnitNumZones 1.3.6.1.3.94.1.6.1.18 222 connUnitModuleId 1.3.6.1.3.94.1.6.1.19 222 connUnitName 1.3.6.1.3.94.1.6.1.20 222 connUnitInfo 1.3.6.1.3.94.1.6.1.
PAGE 267
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID Page connUnitPortState 1.3.6.1.3.94.1.10.1.6 229 connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 230 connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 230 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 230 connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 231 connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 231 connUnitPortSn 1.3.6.1.3.94.1.10.1.12 231 connUnitPortRevision 1.3.6.1.3.94.1.10.1.13 231 connUnitPortVendor 1.3.6.1.3.94.1.
PAGE 268
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID connUnitLinkAgentAddressY 1.3.6.1.3.94.1.12.1.9 240 connUnitLinkAgentAddressTypeY 1.3.6.1.3.94.1.12.1.10 240 connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11 240 connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 241 connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 241 connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14 241 trapReg 1.3.6.1.3.94.2 213 trapMaxClients 1.3.6.1.3.94.2.1 252 trapClientCount 1.3.6.1.3.94.2.
PAGE 269
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID Page connUnitPortStatCountClass2TxFrames 1.3.6.1.3.94.4.5.1.21 245 connUnitPortStatCountClass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 245 connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.23 246 connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 246 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 246 connUnitPortStatCountClass3RxFrames 1.3.6.1.3.94.4.5.1.
PAGE 270
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 251 connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 251 connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 251 connUnitSnsNodeIPAddress 1.3.6.1.3.94.5.2.1.1.7 251 connUnitSnsProcAssoc 1.3.6.1.3.94.5.2.1.1.8 251 connUnitSnsFC4Type 1.3.6.1.3.94.5.2.1.1.9 251 connUnitSnsPortType 1.3.6.1.3.94.5.2.1.1.10 251 connUnitSnsPortIPAddress 1.3.6.1.3.94.5.2.1.1.
PAGE 271
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID Page swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 151 swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 151 swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 152 swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 152 swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 152 swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 153 swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 153 swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.
PAGE 272
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 161 swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 161 swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 161 swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 161 swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 162 swFCPortRxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 162 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 162 swFCPortRxC3Frames 1.3.6.1.4.1.
PAGE 273
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID Page swNsIpAddress 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9 166 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 166 swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 166 swNsIpNxPort 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.12 166 swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13 166 swNsHardAddr 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14 166 swEvent 1.3.6.1.4.1.1588.2.1.1.1.8 137 swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1 167 swEventNumEntries 1.3.6.
PAGE 274
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID swFwCustChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20 172 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 172 swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 172 swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23 172 swFwCustInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24 172 swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25 173 swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
PAGE 275
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID Page swBlmPerfEEMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.2 180 swBlmPerfEEMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.2.1 181 swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 181 swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 181 swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3 181 swBlmPerfEEFCWRx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4 181 swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5 181 swBlmPerfEESid 1.3.6.1.4.
PAGE 276
Table 27 MIB object name and OID matrix (continued) MIB Object Name OID swGroupMemEntry 1.3.6.1.4.1.1588.2.1.1.1.22.2.1 179 swGroupID 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.1 179 swGroupMemWwn 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2 179 swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.3 179 swTrunk 1.3.6.1.4.1.1588.2.1.1.1.24 139 swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 182 swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 182 swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 183 swTrunkPortIndex 1.
PAGE 277
Index A accounting group 84, 108 additional IP objects 54 additional TCP objects 60 address translation group 46 address translation table 46 ASIC performance monitoring group 180 audience 25 authorized reseller, HP 27 B before loading MIBs 32 Brocade MIB files 33 C capability group 88, 108 class 1 accounting table 84 class 2 accounting table 86 class 3 accounting table 87 configuration group 74, 96 connectivity group 216 connectivity unit event table 235 connectivity unit link table 238 connectivity unit
PAGE 278
L U linkincidentMIBtraps group 207 loading brocade MIBs 32 logical entity group 123 UDP group 60 UDP listener table 61 understanding MIBs 30 understanding SNMP bASICs 29 unsupported tables 254 unsupported traps 255 M MIB loading order 33 MIB oids 259 MIB-II object hierarchy 35 MIB-II overview 35 N name server database group 165 O objects and types imported 40 operation group 101 other FX_Port parameters 78 P physical entity group 115 port variables 257 R related documentation 25 revision number scal