Brocade EZSwitchSetup Administrator's Guide - Supporting Fabric OS v5.3.0 and Brocade 200E, 3250, 4100, 4900, 5000 (53-1000441-01, June 2007)

EZSwitchSetup Administrator’s Guide 13

53-1000441-01

Configure the Switch

The EZSwitchSetup Switch Configuration wizard helps you set up or change current switch

parameters and configure the zoning for your switch. Unlike the EZSwitchSetup wizard, which

stepped you through to setting up the hardware, this wizard steps you through the final process of

changing your administrative password and zoning.

FIGURE 10 EZSwitchSetup Setup Parameters

To set switch parameters

1. Follow the onscreen direction to set a new admin password for the switch. Make sure to record

your password and keep it in a secure location for future reference.

2. Optional: Enter a new name for the switch and set the correct date and time.

3. Click Next. The Select Zoning screen displays (-).

Select Zoning

The next step in configuring your switch is to select zoning. You can configure three types of zoning:

• Typical Zoning is predefined on the switch and supports only single-switch fabrics. Select

Typical Zoning if:

- You want to set up and manage a switch without knowing about domains

- You do not know how zoning works

- You do not know where to connect devices