Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

192 Web Tools Administrator’s Guide
Publication Number: 53-1000435-01
Displaying the port mapping
15
5. Click the Enable radio button in the Access Gateway Mode section.
6. Click Apply.
7. Cli ck Yes to restart the switch in Access Gateway mode.
To disable Access Gateway mode
1. Select a switch.
2. Click Switch Admin in the Manage section under Tasks.
The Switch Administration window opens.
3. Save the switch configuration.
4. On the Switch tab, click the Disable radio button in the Switch Status section.
5. Click the Disable radio button in the Access Gateway Mode section.
6. Click Apply.
7. Cli ck Yes to restart the device in native switch mode.
Displaying the port mapping
This section explains how to display the mapped routes of the host connections (F-ports) to the
fabric (N-ports) on Brocade Access Gateway. F_Ports are mapped to N_Ports.
To display port mapping
1. Click Access Gateway Devices in the Monitor section under Tasks.
The Access Gateway Device Display window opens.
FIGURE 89 Access Gateway Device Display