Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

Web Tools Administrator’s Guide 67
Publication Number: 53-1000435-01
Configuring ports
5
Figure 35 Port Administration window, Table view
Configuring ports
Web Tools provides wizards to assist you in configuring ports. This section describes how you can
configure FC ports, logical FCIP ports, GbE ports, and NPIV ports.
CONFIGURING FC PORTS
With the FC Port Configuration wizard, you can configure allowed port types, port speed, and long
distance mode for physical ports.
The following procedure describes how to open the FC Port Configuration wizard. The wizard is
self-explanatory, so the explicit steps are not documented here.
To configure FC ports
1. Click a port in the Switch View to open the Port Administration window (see Figure 33 on
page 64).
2. Click the FC Ports tab.