Fabric OS Troubleshooting and Diagnostics Guide v6.4.0 (53-1001769-01, June 2010)

Fabric OS Troubleshooting and Diagnostics Guide 105
53-1001769-01
Appendix
A
Switch Type and Blade ID
The switchType is a displayed field listed when you run the switchShow command. When you are
gathering information to give to your switch support provider, you may be asked the switch model. If
you do not know the model, you can use this chart to convert the switchType to a B-Series model
number.
switch:admin> switchshow
switchName:Sprint5100
switchType:66.1
<=== convert this number using Table 19
switchState:Online
switchMode:Native
switchRole:Principal
switchDomain:1
switchId:fffc01
switchWwn:10:00:00:05:1e:82:3c:2a
zoning:OFF
switchBeacon:OFF
FC Router:OFF
FC Router BB Fabric ID:128
The number 66 is the switchType and the .1 is the revision of the motherboard of the switch. The
revision number is not necessary when converting the number.
TABLE 19 switchType to B-Series model converter
switchType B-Series switch model ASIC Base switch speed
12 3900 BLOOM 2 Gb 32-port switch
16 3200 BLOOM 2 Gb 8-port value line switch
21 24000 BLOOMII 2 Gb 128-port core fabric switch
26 3850 BLOOMII 2 Gb 16-port switch with switch limit
27 3250 BLOOMII 2 Gb 8-port switch with switch limit
29 4012 GoldenEye 2 Gb 12-port embedded switch
32 4100 Condor 4 Gb 32-port switch
34 200E GoldenEye 2 Gb 16-port switch with switch limit
37 4020 GoldenEye 2 Gb 20-port embedded switch
42 48000 Condor 4 Gb 256-port core fabric switch
43 4024 GoldenEye 2 Gb 24-port embedded switch
44 4900 Condor 4 Gb 64-port
45 4016 GoldenEye 2 Gb 16-port embedded switch
46 7500 Condor 4 Gb 32-port switch and FC Router
51 4018 GoldenEye 2 Gb 16/18-port embedded switch
55 7600 Condor 4 Gb 32-port switch