Fabric OS Troubleshooting and Diagnostics Guide v6.4.0 (53-1001769-01, June 2010)

Fabric OS Troubleshooting and Diagnostics Guide 43
53-1001769-01
Port mirroring
3
Configuring a port to be a mirror port
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the portCfg mirrorport [slot number/]<port number>
--enable command.
NOTE
The enable command enables the port as a mirror port. The disable command disables the mirror
port configuration.
Brocade 5000 3
Brocade 5100 3
Brocade 5300 1
Brocade 5410 1
Brocade 5450 1
Brocade 5460 1
Brocade 5470 1
Brocade 5480 1
Brocade 7500 3
Brocade 7500E 3
Brocade 7600 3
Brocade 7800 1
Brocade DCX 3
Brocade DCX-4S 3
Brocade Encryption Switch 3
Brocade M5424 1
Brocade VA-40FC 3
FA4-18 3
FC10-6 3
FC4-16IP 3
FC4-48 3
FC8-16/32/48/64 3
FR4-18i 3
FS8-18 3
FX8-24 3
TABLE 9 Maximum number of mirror connections
Model Maximum Number of Mirror Connections
(chassis-wide)