Fabric Watch Administrator's Guide v6.4.0 (53-1001770-01, June 2010)

84 Fabric Watch Administrator’s Guide
53-1001770-01
Resource class settings
8
Resource class settings
The Resource class monitors flash memory. It calculates the amount of flash space consumed and
compares it to a defined threshold.
Resource class area
Table 24 describes the Product Name Resource class area. Configure the Resource class using the
sysMonitor command.
Resource class setting guidelines
Use the Resource Class default settings listed in Table 25.
Resource class default settings
Table 25 provides default settings for areas in the Resource class.
TABLE 24 Resource class area
Area Description
Flash Monitors the compact flash space available by calculating the percentage of flash space
consumed and comparing it with the configured high threshold value.
TABLE 25 Resource class default settings
Area Description Default threshold settings Default alarm settings Threshold state
Flash Monitors the
percentage of
compact flash used
Unit: Percentage (%)
Time base: none
Low: 0
High: 90
Buffer: 0
Changed: 0
Below: 3
Above: 3
In-Between: 1
Informative
Informative
Out_of_range
In_range