HP StorageWorks Fabric OS 5.3.2c release notes (5697-0150, October 2009)
Operating systems
For a list of operating systems, see the HP website: http://www.hp.com/go/san.
New features in Fabric OS 5.3.0
This section lists Fabric OS 5.3.0 added features and improvements:
NOTE:
The Fabric OS 5.3.2c firmware release contains the same features introduced in Fabric OS 5.3.0.
However, given that 5.3.2c is supported only on 2–Gb switches, many of these listed 5.3.0 features,
are not applicable to those switches.
• IPv6 support for the management ports
• Firmware download enhancements:
• Support for Secure Copy (SCP)
• Support for passive FTP
• iSCSI Blade–FC4–16IP enhancements:
• Support for iSCSI redirection
• Support for CHAP binding
• Support for LUN delete from a virtual target
• Access Gateway (AG) mode support on the HP StorageWorks 4/16 SAN Switch (not supported
on the 4/8 SAN Switch)
• Access Gateway enhancements:
• WebTools support
• Fabric Manager support
• NPIV on F_Ports
• Fibre Channel Routing (FCR) enhancements
• IP broadcast zone support
• IP over FC also via FCR
• IP filter support (formerly MAC and Management port ACLs in Secure Fabric OS [SFOS])
• Support for FCS with base Fabric OS (formerly in SFOS)
• Support for multiple NTP servers
• Port mirrorinf for HP StorageWorks 4/32B SAN Switch
• Security enhancements
• Support for security admin role
• Support for account lockout for admin role
• Support for strong password policies preventing repeat or sequence characters
• P-EAP/MS-CHAPv2 support for RADIUS
• FCIP
• Support for Fast Write and Tape Pipelining over secure tunnels (not supported by HP at the
time of the release of this document)
• Differentiated Services Code Point (DSCP) markings
4