HP StorageWorks Fabric OS V3.1.3A Release Notes (AA-RUQYC-TE, September 2004)

CLI Command Updates and Changes
25Fabric OS 3.1.3a Release Notes
Without operands, pathInfo will bring up a menu in which the following
parameters can be provided:
destination port A port on the destination switch. pathInfo will
return the state of the port (or area). The embedded
port (-1) is used by default or if the user specifies a
destination port that is not active.
For a switch with blades, the destination is
specified as the area; otherwise, as the port.
-r Command output shows the reverse path in
addition to the forward path.
max hops
The maximum number of hops that the
pathInfo frame is allowed to traverse.
Default: 25.
domain The ID of the destination domain. Mandatory; no
default.
source port The port whose path to the destination domain is
sought. It can be an F_Port or an E_Port. The
embedded port (-1) is used by default. For a switch
with blades, this is specified as the area; otherwise,
as the port.
destination port A port on the destination switch. pathInfo will
return the state of the port and all requested
statistics pertaining to the port. The embedded port
(-1) is used by default or if the specified
destination port is not an existing active port. For a
switch with blades, this is specified as the area;
otherwise, as the port.
basic stats
Requests the reporting of basic statistics on every
link. Default: no.
extended stats
Requests the reporting of extended statistics on
every link. Default: no.
trace reverse path
Provides path information from the destination
port to the source port. Default: no.