HP StorageWorks Fabric OS V3.1.3A Release Notes (AA-RUQYC-TE, September 2004)

New Diagnostic and System Error Messages
37Fabric OS 3.1.3a Release Notes
Message
Critical DIAG-CAMSTAT, 1
Probable Cause
The ASIC improperly counted the number of frames with CRC errors. This
usually indicates an ASIC failure. This message is generated by the
statisticstest command, if problems are found.
Recommended Action
For the SAN Switch 2/16, replace the motherboard FRU.
For the SAN Switch 2/8, you must replace the entire switch.
Severity
Critical
Message
Warning DIAG-CLEAR_ERR, 3
Probable Cause
The port diag error flag (OK or BAD) is cleared.
Recommended Action
This message is for information only; no action is required.
Severity
Warning
DIAG-CAMSTAT
DIAG-CLEAR_ERR