HP StorageWorks Fabric OS V3.1.3A Release Notes (AA-RUQYC-TE, September 2004)

New Diagnostic and System Error Messages
41Fabric OS 3.1.3a Release Notes
Message
Critical DIAG-CMIINVCAP, 1
Probable Cause
Unintended ASIC erroneously received a CMI capture flag. This usually indicates
an ASIC or motherboard failure. This message is generated by the cmitest
command, if problems are found.
Recommended Action
For the SAN Switch 2/16, replace the motherboard FRU.
For the SAN Switch 2/8, you must replace the entire switch.
Severity
Critical
Message
Critical DIAG-CMINOCAP, 1
Probable Cause
CMI intended receiver ASIC failed to get CMI capture flag. This usually indicates
an ASIC or motherboard failure. This message is generated by the cmitest
command, if problems are found.
Recommended Action
For the SAN Switch 2/16, replace the motherboard FRU.
For the SAN Switch 2/8, you must replace the entire switch.
Severity
Critical
DIAG-CMIINVCAP
DIAG-CMINOCAP