HP StorageWorks Fabric OS V3.1.3A Release Notes (AA-RUQYC-TE, September 2004)

New Diagnostic and System Error Messages
58 Fabric OS 3.1.3a Release Notes
Message
Critical DIAG-PORTWRONG, 1
Probable Cause
Frame erroneously received by port M instead of the intended port N. This usually
indicates an ASIC failure. This message is generated by the
portloopbacktest command, if problems are found.
Recommended Action
For the SAN Switch 2/16, replace the motherboard FRU.
For the SAN Switch 2/8, you must replace the entire switch.
Severity
Critical
Message
Warning DIAG-POST_SKIPPED, 4
Probable Cause
POST was not executed on the last boot up.
Recommended Action
This message is for information purposes only; no action is required.
Severity
Warning
DIAG-PORTWRONG
DIAG-POST_SKIPPED