HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

Usage
1
Command
Deletes the specified cartridge and its user data from the VLS. Where the options
are:
-a <s> - VLS filename of cartridge to delete (required)
-b <s> - Barcode value of cartridge to delete (required)
-c <n> - Capacity of cartridge to delete in gigabytes (required)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-l <s> - Name of library with which cartridge is associated (Library_0, ...)
(required)
-s <s> - Storage LUN name (SLun_#) (optional)
-h - Displays command usage information (optional)
removeCartridge
Returns the total usable storage capacity of the storage pool. Where the options
are:
-a <s> - Storage pool name (StoragePool_#) (optional)
-h - Displays command usage information (optional)
getStorageCapacity
Returns a list of the usable storage capacity of each storage pool on the VLS.
getStorageCapacit-
ies
Returns a list of the storage LUNs on the VLS. List includes the storage LUN name,
IP address, storage pool number, number in storage pool, and so on for each
LUN.
getStorageLuns
Returns a list of the storage LUNs in the disk array. Where the options are:
-a <s> - Disk array IP address (required)
-h - Displays command usage information (optional)
getStorageLunsByAr-
ray
Returns a list of the storage LUNs on the storage pool. Where the options are:
-a <s> - Storage pool name (StoragePool_#) (optional)
-h - Displays command usage information (optional)
getStorageLunsBySP
Returns a list of the storage LUNs on the node. Where the options are:
-a <n> - Node ID (0, 1, 2, ... - default is 0)) (optional)
-h - Displays command usage information (optional)
getStorageLunsByN-
ode
Creates a new storage pool. Where the options are:
-n <n> - maximum number of cartridges (1 to 8000) (optional)
-h - Displays command usage information (optional)
createStoragePool
Deletes a storage pool. Where the options are:
-a <s> - Storage pool name (StoragePool_#) (required)
-h - Displays command usage information (optional)
deleteStoragePool
Deletes all storage pools on the VLS and all the LUNs in all storage pools.
deleteAllStorage-
Pools
Returns a list of the storage pool names on the VLS.
getStoragePoolNames
HP StorageWorks 6000–series Virtual Library System User Guide 207