HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)
Front Panel LEDs and Buttons
StatusDescriptionItem
• Green = System is on.
• Amber = System is shut down, but power is
still applied.
• Off = Power cord is not attached, power
supply failure has occurred, no power sup-
plies are installed, facility power is not
available, or the DC-to-DC converter is not
installed.
Power On/Standby button and system power
LED
1
• Blue = Identification is activated.
• Flashing blue = System is being managed
remotely.
• Off = Identification is deactivated.
UID button/LED2
• Green = System health is normal.
• Amber = System is degraded. To identify the
component in a degraded state, refer to sys-
tem board LEDs.
• Red = System is critical. To identify the com-
ponent in a critical state, refer to system
board LEDs.
• Off = System health is normal (when in
standby mode).
Internal health LED3
• Green = Power supply health is normal.
• Amber = Power redundancy failure occurred.
• Off = Power redundancy failure has oc-
curred. When the node is in standby mode,
power supply health is normal.
External health LED (power supply)4
Component Identification214