HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

StatusDescriptionItem
Green = Protection enabled
Flashing amber = Memory configuration error
Amber = Memory failure occurred
Off = No protection
Online spare memory LED1
Green = Protection enabled
Flashing amber = Memory configuration error
Amber = Memory failure occurred
Off = No protection
Mirrored memory LED2
Amber = Failure
Off = Normal. For additional information
detailing the causes for the activation of these
LEDs, refer to HP Systems Insight Display LEDs
and Internal Health LED Combinations.
All other LEDs
IMPORTANT:
If more than one FBDIMM slot LED is illuminated, further troubleshooting is required. Test each bank
of FBDIMMs by removing all other FBDIMMs. Isolate the failed FBDIMM by replacing each FBDIMM
in a bank with a known working FBDIMM.
NOTE:
The HP Systems Insight Display LEDs represent the system board layout.
Rear Panel Components
DescriptionItem
Expansion slot 1 blank1
Expansion slot 2 blank2
Quad port FC card, host port, port 03
Quad port FC card, host port, port 14
HP StorageWorks 6000–series Virtual Library System User Guide 233