HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

StatusDescriptionItem
• Green = System health is normal.
• Amber = System is degraded. To identify the
component in a degraded state, refer to the
QuickFind Diagnostic Display LEDs.
• Red = System is critical. To identify the com-
ponent in a critical state, refer to QuickFind
Diagnostic Display LEDs.
• Off = System health is normal (when in
standby mode).
External health LED3
• Green = System is on.
• Amber = System is shut down (auxiliary
power only).
• Off = Power cord is not attached, power
supply failure has occurred, no power sup-
plies are installed, or facility power is not
available.
Power On/Standby button4
• On = Drive activity.
• Flashing = High activity on the drive or drive
is being configured as part of an array.
• Off = No drive activity.
For more information about the meaning of the
various hard drive LED illumination patterns, see
Hard drive LED combinations.
Hard drive activity LED5
• On = Drive is part of an array and is cur-
rently working.
• Flashing = Online activity.
• Off = No online activity.
For more information about the meaning of the
various hard drive LED illumination patterns, see
Hard drive LED combinations.
Hard drive online status LED6
• On = Drive failure.
• Flashing = Fault process activity.
• Off = No fault process activity.
For more information about the meaning of the
various hard drive LED illumination patterns, see
Hard drive LED combinations.
Hard drive fault status LED7
See Power supply LED combinations.Power supply LEDs8–9
Table 12 Power supply LED combinations
Status
9 Fault LED (am-
ber)
8 Power LED
(green)
No AC powerOffOff
Component Identification242