HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

3. After performing the replacement procedure, slide the node back into the rack:
a. Press the node rail-release latches (1) and slide the node fully into the rack.
Figure 73 Sliding the node back into the rack
.
b. Press the node firmly into the rack to secure it in place.
Extending the VLS6800 Node from the Rack
WARNING!
To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately
stabilized before extending the node from the rack.
WARNING!
Be careful when pressing the rail-release levers and sliding the component into or out of the rack. The
sliding rails could pinch your fingertips.
HP StorageWorks 6000–series Virtual Library System User Guide 259