HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

3. After performing the replacement procedure, slide the node back into the rack:
a. Reach around the front of the node to press the rail-release levers at the front of both node
rails and slide the node into the rack.
Figure 76 Sliding the node into the rack
.
b. Tighten the thumbscrews to secure the node to the rack.
Figure 77 Tightening the thumbscrews
.
Removing a VLS6100, VLS6200, or VLS6500 Node from the Rack
To remove the node from a rack:
1. Power off the node. See Powering Off the System.
2. Disconnect the cabling.
3. Extend the node from the rack. See Extending the Node from the Rack.
HP StorageWorks 6000–series Virtual Library System User Guide 261