HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

5. Slide the component out the front of the node.
Figure 85 Removing the processor zone fan module
.
To replace the component, reverse the removal procedure.
DIMM
1. Power off the node. See Powering Off the System.
2. Extend or remove the node from the rack. See Extending the Node from the Rack.
3. Remove the access panel. See Removing the VLS Node Access Panel.
4. Open the DIMM slot latches (1).
5. Remove the DIMM.
Figure 86 Removing the node DIMM
.
CAUTION:
Use only Compaq branded or HP DIMMs. DIMMs from other sources may adversely affect data
integrity.
To replace the component, reverse the removal procedure.
Component Replacement270