HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

NOTE:
FBDIMMs do not seat fully if turned the wrong way.
When replacing a FBDIMM, align the FBDIMM with the slot and insert the FBDIMM firmly (1), pressing
down until the FBDIMM snaps into place. When fully seated, the FBDIMM slot latches (2) lock into
place.
Figure 96 Installing the node FBDIMM
.
VLS6800 Node Component Replacement
SCSI Hard Drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the node unless all bays are
populated with either a component or a blank.
1. Press the ejector lever release button to unlock the ejector lever on the hard drive.
2. Pull the ejector lever open to release the drive.
Component Replacement284