HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

Diskette Drive
1. Power off the node. See Powering Off the System.
2. Use the Torx T-15 tool to press the ejection button for the diskette drive , and pull the diskette
drive out of the drive bay. See Locating and Removing the Torx T-15 Tool (VLS6800 node only).
Figure 99 Removing the diskette drive
.
To replace the component:
1. Insert the diskette drive into the drive bay until it seats.
2. Power on the node. See Powering on the VLS6000–series System.
DVD-CD Drive
1. Power off the node. See Powering Off the System.
Component Replacement286