HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

5. Remove the non-functioning fan.
Figure 102 Removing a fan
.
To replace the component:
1. Install the replacement fan.
2. Be sure that the LED on the replacement fan is green.
3. Reinstall the node access panel. See Installing the VLS6800 Node Access Panel.
4. Press the rail-release levers at the front of both node rails and slide the node into the rack.
5. Secure the node in the rack by tightening the thumbscrews.
Processor Memory Board
1. Power off the node. See Powering Off the System.
2. Extend the node from the rack. See Extending the VLS6800 Node from the Rack.
3. Remove the access panel. See Removing the VLS6800 Node Access Panel.
HP StorageWorks 6000–series Virtual Library System User Guide 289