HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

4. Slide the front end of the right rack rail toward the inside front of the rack until the locking latch
engages with the marked hole in the front rack upright.
Figure 5 Engaging the rack rail with the marked hole in the front of the rack
.
5. Extend the back end of the rail toward the inside rear of the rack until the locking latch engages
with the marked hole in the rear rack upright.
Figure 6 Engaging the rack rail with the marked hole in the rear of the rack
.
HP StorageWorks 6000–series Virtual Library System User Guide 41