HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

4. Insert the two rail tabs from the end of the rack rail assembly into the marked holes on the inside
of the rear of the rack.
Figure 18 Inserting the rail tabs on the rear of the rack
.
5. Adjust the rack rail depth by sliding it forward.
6. Insert the two rail tabs from the rack rail assembly into the marked holes on the inside of the front
of the rack.
Figure 19 Inserting the rail tabs on the front of the rack
.
7. Release the rail compression lever to seat the tabs in the rack post.
8. Repeat steps 3 through 7 for the other rail.
Hardware Installation50