HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

7. Reach around the front of the node to press the rail-release levers at the front of both node rails,
and continue to slide the node into the rack.
Figure 23 Sliding the node to the rear of the rack
.
8. Tighten the thumbscrews to secure the node to the rack.
Figure 24 Tightening the thumbscrews
.
9. Reinstall the power supplies.
Installing the VLS6200 Node into a Rack
NOTE:
If you are installing the node into a telco rack, order the appropriate option kit at the RackSolutions.com
web site: http://www.racksolutions.com/hp. Follow the instructions on the web site to install the rack
brackets.
HP StorageWorks 6000–series Virtual Library System User Guide 53